User's Manual
Table Of Contents
- Introduction
- Preparations
- Shooting
- Basic Shooting Procedures
- Selecting System Definition, File Format and Video Format
- Zoom Operation
- Focus Operation
- Adjusting the Brightness
- Adjusting the Iris
- Setting the Gain
- Setting the Electronic Shutter
- Adjusting the White Balance
- Adjusting the Camera Image
- Audio Recording
- Audio Output during Recording
- Time Code and User’s Bit
- Setting Time Code Generator
- Setting the User’s Bit
- Synchronizing the Time Code with an External Time Code Generator
- Setting Zebra Pattern
- Setting Spot Meter
- Acquiring Positioning Information by GPS
- Viewing Recorded Videos Immediately (Clip Review)
- Displaying the Video Signal Monitor
- Recording Simultaneously at Two Different Definitions
- Series Rec
- Dual Rec
- Backup Rec
- Special Recording
- Splitting the Clips Freely (Clip Cutter Trig)
- Playback
- Menu Display and Detailed Settings
- Display/Status Screen
- Camera Features
- Connecting External Devices
- Connecting to the Network
- Functions of Network Connection
- Preparing Network Connection
- Importing Metadata
- Uploading a Recorded Video Clip
- FTP Resume Feature
- Connecting from a Web Browser
- Editing Metadata
- Uploading a Recording Clip via a Web Browser
- View Remote Control and Camera Control Functions
- Changing the Settings via a Web Browser
- Managing the Network Connection Settings File
- Performing Live Streaming
- Return Video/Audio from the Network (Return over IP)
- IFB (Return Audio)
- Others
Side Control Panel
.
PRESET
AUDIO INPUT
TC
F-RUN
R-RUN
REGEN
UB
GEN
DISPLAY
JK
MLINO
A
B
C
D
E
F
G
H
ST
U
aZb
X
Y
V
W
PQ R
A
[ONLINE/5
] Button
0
Switches live streaming between ON/OFF.
(
A P214 [Starting Distribution] )
0
You can also use it as a user button by
assigning a specific feature in the menu
setting to this button. Initial setting: Live
streaming
(
A P45 [Assignment of Functions to User
Buttons] )
B
[USER4] Button
It can be assigned with a specific menu function.
(A P45 [Assignment of Functions to User
Buttons] )
C
[LIGHT] Switch
For selecting the operation mode of the video
light connected to the [LIGHT] terminal.
AUTO
:
The video light lights up only during
recording when the video light is
turned on.
MANUAL
:
The video light lights up or goes out
when the video light is turned on or
off.
D
[MONI SELECT] Switch/[CH SELECT] Switch
For configuring the audio monitor (speaker/
headphone) output with the combined use of
two switches.
(A P181 [Connecting the Headphone] )
E
[USER1] Button
It can be assigned with a specific menu function.
(A P45 [Assignment of Functions to User
Buttons] )
F
[USER2] Switch
It can be assigned with a specific menu function.
(A P45 [Assignment of Functions to User
Buttons] )
Memo :
0
Even when the function assigned to the
[USER2] switch is assigned to another user
button at
the same time, only the [USER2] switch
is enabled.
G
[USER3] Button
It can
be assigned with a specific menu function.
(A P45 [Assignment of Functions to User
Buttons] )
H
[USER0] Switch
It can be assigned with a specific menu function.
(A P45 [Assignment of Functions to User
Buttons] )
I
[GAIN H/M/L] Switch
For selecting the gain sensitivity level.
(A P61 [Setting the Gain] )
J
[MENU/THUMB] Button
0
Displays the menu screen during Camera
mode.
0
Switches between [Main Menu] and
[Favorites Menu] when the [MENU/THUMB]
button is pressed and held down while the
menu screen is displayed.
(
A P
105 [Basic Operations in Menu Screen] )
0
Displays the
menu screen when the button is
pressed during thumbnail display in the
Media mode.
0
Stops playback and displays the thumbnail
screen when the button is pressed during
playback screen display in the Media mode.
K
[POWER ON/OFF] Switch
Turns ON/OFF the power.
0
When the power is turning OFF, “P.OFF”
appears on the LCD monitor and viewfinder.
0
Wait for 5 seconds or more to turn on the
power again.
L
[OUTPUT] Switch
For configuring the output signal when in the
Camera mode.
0
CAM/AUTO KNEE ON: Turns “ON” Auto
Knee.
0
CAM/AUTO KNEE OFF: Turns
“OFF” Auto
Knee.
0
BARS/AUTO KNEE OFF: Outputs a color
bar.
M
[WHT.BAL PRST/A/B
] Switch
For switching the white balance.
(A P63 [Adjusting the White Balance] )
N
[MONITOR] Volume Adjustment Knob
For adjusting the volume of the audio monitor
(speaker/headphone).
O
[ALARM] Volume Adjustment Knob
For adjusting the warning alarm volume of the
audio monitor (speaker/headphone).
Memo :
0
Whether the sound is to be muted or output
when it is at the minimum level can be configured
in [Min. ALARM Level].
24
Names of Parts
Introduction