User's Manual
Table Of Contents
- Introduction
- Preparations
- Shooting
- Basic Shooting Procedures
- Selecting System Definition, File Format and Video Format
- Zoom Operation
- Focus Operation
- Adjusting the Brightness
- Adjusting the Iris
- Setting the Gain
- Setting the Electronic Shutter
- Adjusting the White Balance
- Adjusting the Camera Image
- Audio Recording
- Audio Output during Recording
- Time Code and User’s Bit
- Setting Time Code Generator
- Setting the User’s Bit
- Synchronizing the Time Code with an External Time Code Generator
- Setting Zebra Pattern
- Setting Spot Meter
- Acquiring Positioning Information by GPS
- Viewing Recorded Videos Immediately (Clip Review)
- Displaying the Video Signal Monitor
- Recording Simultaneously at Two Different Definitions
- Series Rec
- Dual Rec
- Backup Rec
- Special Recording
- Splitting the Clips Freely (Clip Cutter Trig)
- Playback
- Menu Display and Detailed Settings
- Display/Status Screen
- Camera Features
- Connecting External Devices
- Connecting to the Network
- Functions of Network Connection
- Preparing Network Connection
- Importing Metadata
- Uploading a Recorded Video Clip
- FTP Resume Feature
- Connecting from a Web Browser
- Editing Metadata
- Uploading a Recording Clip via a Web Browser
- View Remote Control and Camera Control Functions
- Changing the Settings via a Web Browser
- Managing the Network Connection Settings File
- Performing Live Streaming
- Return Video/Audio from the Network (Return over IP)
- IFB (Return Audio)
- Others
P
[AUDIO INPUT CH1/2/3/4]
Recording Level
Adjustment Knob
For adjusting the recording level manually when
the [MANUAL/AUTO] selection switch is set to
“MANUAL”.
(A P69 [Audio Recording] )
Q
[AUDIO CH1/2/3/4]-[MANUAL/AUTO]
Selection Switch
For configuring the recording level of each
channel to [MANUAL/AUTO].
(A P69 [Audio Recording] )
R
[AUDIO CH1/2/3/4]-[FRONT/REAR/
WIRELESS] Selection Switch
For selecting the recording input path [FRONT/
REAR/WIRELESS] for each channel.
(A P69 [Audio Recording] )
S
[TC DISPLAY] TC/UB Display Switch
Switches the display between time code and
user’s bit.
(A P73 [Time Code and User’s Bit] )
(A P74 [Setting Time Code Generator] )
T
[TC GEN] Time Code Generator Switch
For configuring the run mode of the time code.
F-RUN
:
The time code operates in the run
mode at all times. Synchronizes
with the external time code when an
external time code generator is
connected.
R-RUN
:
The time code operates in the run
mode while recording is in
progress. When the SD card is
replaced, recording continues from
where it last stopped using the
previous card.
REGEN
:
The time code operates in the run
mode while recording is in
progress. When the SD card is
replaced, recording starts from the
last time code recorded on the
current SD card.
(A P73 [Time Code and User’s Bit] )
(A P74 [Setting Time Code Generator] )
(A P78 [Synchronizing the Time Code with an
External Time Code Generator] )
U
[TC PRESET
] Button
When the [TC GEN] switch is set to “F-RUN” or
“R-RUN”, this camera recorder enters or exits
Preset mode when this button is pressed.
Upon entering Preset mode, an enlarged
display appears on the LCD monitor. Use the
cross-shaped button to move the cursor and
select a value. Next, press the [STATUS/SET]
button to preset the time code and the screen
returns to the original display.
Memo :
0
The UB mode is enabled only when
[TC/UB]
B
[UB Mode] is set to “Preset”.
V
[B.LIGHT] Button
Sets the LCD monitor backlight.
Pressing the button each time switches the
mode as follows:
Dark B Normal B Bright B Off B Dark
W
[CAM/MEDIA] Button
Switches between the Camera mode and
Media mode.
(A P
20 [Operation Modes] )
X
Cross-shaped (JKHI)/[STATUS/SET] Button
(R)
0
For operating the menu and cursor and for
confirming a setting, as well as for configuring
the settings for time code and user’s bit.
0
When in the Camera mode (menu is not
displayed), pressing the [STATUS/SET]
button displays the status screen.
0
When a function is assigned to the cross-
shaped button, it functions as a user button.
(A P45 [Assignment of Functions to User
Buttons] )
Y
[
ACCESS] Lamp
The indicator lights up in green when the SD
card is being accessed.
Memo :
0
Regardless of whether a recording media has
been inserted, the access lamp will light up for
about 5 seconds when the power is turned on.
0
Z
[CANCEL/RESET] Button
0
Cancels
various
settings and stops playback.
0
Performs reset when the TC mode or UB
mode is being configured during enlarged
display on the LCD monitor.
Names of Parts
25
Introduction