User's Manual
Table Of Contents
- Introduction
- Preparations
- Shooting
- Basic Shooting Procedures
- Selecting System Definition, File Format and Video Format
- Zoom Operation
- Focus Operation
- Adjusting the Brightness
- Adjusting the Iris
- Setting the Gain
- Setting the Electronic Shutter
- Adjusting the White Balance
- Adjusting the Camera Image
- Audio Recording
- Audio Output during Recording
- Time Code and User’s Bit
- Setting Time Code Generator
- Setting the User’s Bit
- Synchronizing the Time Code with an External Time Code Generator
- Setting Zebra Pattern
- Setting Spot Meter
- Acquiring Positioning Information by GPS
- Viewing Recorded Videos Immediately (Clip Review)
- Displaying the Video Signal Monitor
- Recording Simultaneously at Two Different Definitions
- Series Rec
- Dual Rec
- Backup Rec
- Special Recording
- Splitting the Clips Freely (Clip Cutter Trig)
- Playback
- Menu Display and Detailed Settings
- Display/Status Screen
- Camera Features
- Connecting External Devices
- Connecting to the Network
- Functions of Network Connection
- Preparing Network Connection
- Importing Metadata
- Uploading a Recorded Video Clip
- FTP Resume Feature
- Connecting from a Web Browser
- Editing Metadata
- Uploading a Recording Clip via a Web Browser
- View Remote Control and Camera Control Functions
- Changing the Settings via a Web Browser
- Managing the Network Connection Settings File
- Performing Live Streaming
- Return Video/Audio from the Network (Return over IP)
- IFB (Return Audio)
- Others
Electronic Viewfinder u v
(A P42 [Adjusting the Viewfinder] )
.
A
D
B
C
F
E
L MJ K
O NQ P
G
H
I
A
Microphone Holder Lock Knob
B
Microphone Holder
C
Front Tally Lamp
(A P
46 [Tally Lamp] )
(
A P222 [Blinking of the Tally Lamp] )
D
Eyepiece Focus Ring
For adjusting the visibility.
E
Electronic Viewfinder
F
Eyepiece
Prevents external light from entering the
viewfinder screen and cameraman’s vision.
G
[USER1] Button (VF)
It can be assigned with a specific menu function.
Initial setting: VF Display
(A P45 [Assignment of Functions to User
Buttons] )
H
[USER2] Button (VF)
It can be assigned with a specific menu function.
Initial setting: Expanded Focus
(A P45 [Assignment of Functions to User
Buttons] )
I
Slide Stopper
Use it when mounting or unmounting the
viewfinder.
J
[MIRROR] Switch
Flips the image.
L/R: Flips horizontally; OFF: Normal display; B/
T: Flips vertically
K
[B.LIGHT] Switch
For configuring the brightness of the viewfinder.
H: Bright; N: Normal; L: Dark
L
[ZEBRA] Switch
Displays the zebra pattern.
ON: Turns on zebra pattern; OFF: Turns off
zebra pattern; MOMENT: “Turns on zebra
pattern” for a specific time interval while the
switch is being pressed.
M
[TALLY
] Front Tally Switch
For configuring the front tally lamp.
HIGH: Bright; OFF: Light off; LOW: Dark
(
A P46 [Tally Lamp] )
(A P222 [Blinking of the Tally Lamp] )
N
[BRIGHT] Knob
For adjusting the brightness of the viewfinder.
O
[CONTRAST] Knob
For adjusting the contrast of the viewfinder.
P
[CHROMA] Knob
For adjusting the color of the viewfinder.
Q
[PEAKING] Knob
For adjusting the outline of the viewfinder.
28
Names of Parts
Introduction