User's Manual

Operation Lock Feature
You can use this feature to prevent erroneous
camera operation.
.
1
While in the Camera mode (when the
display screen appears), press and hold
the [CANCEL/RESET
] button for 5 seconds
or longer.
0
The operation
lock turns on, and an operation
lock icon (r) appears on the display
screen.
0
Press the [CANCEL/RESET] button again for
5 seconds or longer to turn off the operation
lock.
Memo :
0
The operation lock feature is only valid in the
Camera mode.
(A P20 [Operation Modes] )
0
The power turns off and the operation lock is
disengaged.
0
The following remote operations are possible
even when the operation lock feature is turned
on (“On”).
0
Operation from
the remote control unit that is
connected to the [REMOTE] terminal.
0
Remote operation of the camera through
access via a browser on devices such as a
smartphone, tablet terminal, or PC.
Operation lock does not apply to the following
buttons and switches.
0
[POWER ON/OFF]
switch
0
[ND FILTER
] switch
0
[MONI SELECT]
switch
0
[CH SELECT] switch
0
[AUDIO INPUT CH1/2/3/4] recording level
adjustment knob
0
[AUDIO SELECT CH1/2/3/4]-[
MANUAL/
AUTO] selection switch
0
[AUDIO SELECT CH1/2/3/4
]-[FRONT/REAR/
WIRELESS] selection switch
0
[TC PRESET
] button
0
[TC GEN]
time code generator switch
0
[MONITOR] volume adjustment knob
0
[ALARM] volume adjustment knob
0
[REC] button
0
User button assigned with the [Rec
] function
0
All switches on the lens
0
While the viewfinder is connected
0
[PEAKING][BRIGHT][CONTRAST
]
[CHROMA] Knob
0
[MIRROR]
[TALLY
] Switch
Operation Lock Feature
53
Preparations