User's Manual
Table Of Contents
- Introduction
- Preparations
- Shooting
- Basic Shooting Procedures
- Selecting System Definition, File Format and Video Format
- Zoom Operation
- Focus Operation
- Adjusting the Brightness
- Adjusting the Iris
- Setting the Gain
- Setting the Electronic Shutter
- Adjusting the White Balance
- Adjusting the Camera Image
- Audio Recording
- Audio Output during Recording
- Time Code and User’s Bit
- Setting Time Code Generator
- Setting the User’s Bit
- Synchronizing the Time Code with an External Time Code Generator
- Setting Zebra Pattern
- Setting Spot Meter
- Acquiring Positioning Information by GPS
- Viewing Recorded Videos Immediately (Clip Review)
- Displaying the Video Signal Monitor
- Recording Simultaneously at Two Different Definitions
- Series Rec
- Dual Rec
- Backup Rec
- Special Recording
- Splitting the Clips Freely (Clip Cutter Trig)
- Playback
- Menu Display and Detailed Settings
- Display/Status Screen
- Camera Features
- Connecting External Devices
- Connecting to the Network
- Functions of Network Connection
- Preparing Network Connection
- Importing Metadata
- Uploading a Recorded Video Clip
- FTP Resume Feature
- Connecting from a Web Browser
- Editing Metadata
- Uploading a Recording Clip via a Web Browser
- View Remote Control and Camera Control Functions
- Changing the Settings via a Web Browser
- Managing the Network Connection Settings File
- Performing Live Streaming
- Return Video/Audio from the Network (Return over IP)
- IFB (Return Audio)
- Others
Adjusting the Brightness
Adjust the brightness using Iris, Gain, Shutter
speed and ND filter according to the brightness of
the object.
Adjusting
the
Brightness Automatically:
Automatic Brightness Adjustment (AE)
Mode
Iris, Gain, Shutter speed and ND filter are
automatically adjusted
according to the brightness
of the object to maintain optimum brightness.
To set only the Gain, Iris and Shutter to Auto mode,
set the Full Auto mode to off before setting each
item to the automatic adjustment mode using the
user button assigned with “Full Auto”.
1
Set Gain, Iris and Shutter to Auto mode.
0
[Adjusting the Iris] (A P 60)
0
[Setting the Gain] (
A P 61)
0
[Setting the Electronic Shutter] (A P 62)
2
Set the target level (brighter/darker) to
maintain optimum brightness during
automatic adjustment.
0
Press the user button assigned with “AE
Level
” and when the “AE±” indication turns
white operate the cross-shaped button (JK)
to set the target level.
0
This can be configured in [Camera
Function
]
B [AE Level].
.
100min
50min
282min
1
/60
F2.8
AE
±0
ND1
/64
12 :34 :56
ISO
102400
00: 00:00.00
1080 /30p
SDI IN
ITU709
COMPRESS
5 . 6 f t
B 5600
K
Memo :
0
Using the user button assigned with “Full Auto”
to enter the Full Auto mode also activates the
automatic brightness adjustment (AE) mode. In
this case, the White Balance also enters into
Auto mode forcibly.
0
The convergence speed of the automatic
adjustment for
automatic brightness adjustment
(AE) can be set in the menu.
(A P109 [ AE Speed ] )
0
If one or more of the items (Gain, Iris and
Shutter) have been set to Auto mode, the value
of the corresponding items when the user button
that is assigned “AE Lock” is pressed can be
fixed.
(A P113 [ AE Lock ] )
0
If one or more of the items (Gain, Iris and
Shutter) have been set to Auto mode, the
automatic brightness adjustment (AE) mode is
enabled.
Adjusting the Brightness Manually
Use the user button assigned with “Full Auto”
to set
Full Auto mode to off, some or all of the items (Iris,
Gain and Shutter Speed) can be manually
adjusted.
1
Set Full Auto mode to off using the user
button assigned with “
Full Auto”.
2
Adjust the Iris, Gain and Shutter speed.
0
[Adjusting the Iris] (A P 60)
0
[Setting the Gain] (
A P 61)
0
[Setting the Electronic Shutter] (A P 62)
Memo :
0
The brightness cannot be manually adjusted in
the Full Auto mode.
0
If Iris, Gain and Shutter Speed are manually
adjusted, the [AE Level] setting is temporarily
disabled.
Adjusting the Brightness
59
Shooting