User's Manual
Table Of Contents
- Introduction
- Preparations
- Shooting
- Basic Shooting Procedures
- Selecting System Definition, File Format and Video Format
- Zoom Operation
- Focus Operation
- Adjusting the Brightness
- Adjusting the Iris
- Setting the Gain
- Setting the Electronic Shutter
- Adjusting the White Balance
- Adjusting the Camera Image
- Audio Recording
- Audio Output during Recording
- Time Code and User’s Bit
- Setting Time Code Generator
- Setting the User’s Bit
- Synchronizing the Time Code with an External Time Code Generator
- Setting Zebra Pattern
- Setting Spot Meter
- Acquiring Positioning Information by GPS
- Viewing Recorded Videos Immediately (Clip Review)
- Displaying the Video Signal Monitor
- Recording Simultaneously at Two Different Definitions
- Series Rec
- Dual Rec
- Backup Rec
- Special Recording
- Splitting the Clips Freely (Clip Cutter Trig)
- Playback
- Menu Display and Detailed Settings
- Display/Status Screen
- Camera Features
- Connecting External Devices
- Connecting to the Network
- Functions of Network Connection
- Preparing Network Connection
- Importing Metadata
- Uploading a Recorded Video Clip
- FTP Resume Feature
- Connecting from a Web Browser
- Editing Metadata
- Uploading a Recording Clip via a Web Browser
- View Remote Control and Camera Control Functions
- Changing the Settings via a Web Browser
- Managing the Network Connection Settings File
- Performing Live Streaming
- Return Video/Audio from the Network (Return over IP)
- IFB (Return Audio)
- Others
Setting the Electronic
Shutter
You can change the shutter speed (time for each
shooting frame) using the electronic shutter
function. Electronic shutter can be adjusted
manually or automatically.
Manual Shutter Mode (Manual Shutter
Switching)
1
Set Full Auto mode to off using the user
button assigned with “
Full Auto”.
2
Set [Camera Function] B [Shutter] to
“Slow” or “Step/Variable”.
0
The shutter speed appears on the screen.
.
100min
50min
282min
1
/60
F2.8
AE
±0
ND1
/64
12 :34 :56
ISO
102400
00: 00:00.00
1080 /30p
SDI IN
ITU709
COMPRESS
5 . 6 f t
B 5600
K
Memo :
0
To display
Shutter in angle (DEG), set [WFrame
Rate] to “25p” and set [LCD/VF] B [Display
Type] B [Shutter] to “DEG”.
(A P152
[ W Frame Rate ] )
(
A P109 [ Shutter ] )
Switching Shutter Speed
o
Manual shutter mode (step/variable)
Press down the [SHUTTER] switch toward the
“SEL” end.
When the shutter speed indication turns
white, press down the [SHUTTER] switch
repeatedly to change the setting.
Example:
.
1/60 1/100 1/2000
1/60.00
1/1000
Variable
Step
After the shutter speed indication turns white, the
setting value can be changed using the cross-
shaped button (JK).
You can use the cross-shaped button I to switch
to variable
mode and the cross-shaped button H to
switch to step mode.
Shutter
Mode
Frame
Rate
Setting
Value
Setting Value
(Shutter
OFF)
Step
60p, 60i,
30p
1/60,
1/100,
1/120,
1/250,
1/500,
1/1000,
1/2000
1/60
Variable 1/30.00 -
1/9873
Step
50p, 50i,
25p
1/50,
1/60,
1/100,
1/120,
1/250,
1/500,
1/1000,
1/2000
1/50
Variable 1/25.00 -
1/9873
o
Manual shutter mode (low speed)
Press down the [SHUTTER] switch toward the
“SEL”
end.
When the shutter speed indication turns
white, press down the [SHUTTER] switch
repeatedly to change the setting.
After the shutter speed indication turns white, the
setting value can also be changed using the cross-
shaped button (JK).
Shutter
Mode
Frame
Rate
Setting
Value
Setting Value
(Shutter
OFF)
Slow 60p, 60i,
30p
1/30,
1/15,
1/7.5,
1/3.75
1/60
50p, 50i,
25p
1/25,
1/12.5,
1/6.25,
1/3.125
1/50
62
Setting the Electronic Shutter
Shooting