User's Manual
Table Of Contents
- Introduction
- Preparations
- Shooting
- Basic Shooting Procedures
- Selecting System Definition, File Format and Video Format
- Zoom Operation
- Focus Operation
- Adjusting the Brightness
- Adjusting the Iris
- Setting the Gain
- Setting the Electronic Shutter
- Adjusting the White Balance
- Adjusting the Camera Image
- Audio Recording
- Audio Output during Recording
- Time Code and User’s Bit
- Setting Time Code Generator
- Setting the User’s Bit
- Synchronizing the Time Code with an External Time Code Generator
- Setting Zebra Pattern
- Setting Spot Meter
- Acquiring Positioning Information by GPS
- Viewing Recorded Videos Immediately (Clip Review)
- Displaying the Video Signal Monitor
- Recording Simultaneously at Two Different Definitions
- Series Rec
- Dual Rec
- Backup Rec
- Special Recording
- Splitting the Clips Freely (Clip Cutter Trig)
- Playback
- Menu Display and Detailed Settings
- Display/Status Screen
- Camera Features
- Connecting External Devices
- Connecting to the Network
- Functions of Network Connection
- Preparing Network Connection
- Importing Metadata
- Uploading a Recorded Video Clip
- FTP Resume Feature
- Connecting from a Web Browser
- Editing Metadata
- Uploading a Recording Clip via a Web Browser
- View Remote Control and Camera Control Functions
- Changing the Settings via a Web Browser
- Managing the Network Connection Settings File
- Performing Live Streaming
- Return Video/Audio from the Network (Return over IP)
- IFB (Return Audio)
- Others
Automatic Shutter Mode (Automatic
Shutter Adjustment)
1
Set Full Auto mode to off using the user
button assigned with
“
Full Auto”.
2
Set [Camera Function] B [Shutter] to “EEI”.
0
Automatic Shutter mode adjusts the shutter
speed automatically according to the
brightness of the object.
3
Set the controllable range for the Automatic
Shutter in [Camera Function
] B [EEI Limit].
(A P110 [ EEI Limit ] )
Memo :
0
Use the
user button assigned with “Full Auto” to
enter the Full Auto mode also activates the
Automatic Shutter mode. In this case, the Iris,
Gain and White Balance also enter into Auto
mode forcibly.
0
The shutter
operation during Full Auto mode can
be configured in [Camera Function] B [Full
Auto] B [Shutter].
0
While in the Automatic Shutter mode, and
[AE
Lock] is set to
“AE” or “AE/FAW”, a icon
appears on the left side of the shutter speed
during lock operation.
Adjusting the White
Balance
Adjust the white balance according to the color
temperature of the lighting. You can select the
adjustment mode according to the shooting
conditions.
As the color of the light (color temperature) varies
according to the light source, it is necessary to
readjust the white balance when the main light
source illuminating the subject changes.
.
Automatic White Balance Mode (FAW:
Fulltime Auto White balance)
1
Set Full Auto mode to off using the user
button assigned with “Full Auto”.
2
Assign “FAW” (Full Auto
White Balance) to
one of the three [WHT.BAL] switches.
0
You can set the Full Auto White Balance
feature to either “A”, “B”, or “PRST
” in
[Camera Function]
B [FAW].
(A P
110 [ FAW ] )
0
If the position assigned with “FAW” is
selected using the [WHT BAL B/A/PRST
]
switch, the Automatic White Balance mode is
enabled and an appropriate white balance is
automatically adjusted according to the color
temperature of the lighting on the subject.
Caution :
0
The accuracy
of [FAW] is inferior to that of [AWB]
(Auto White Balance).
0
When the power of the camera recorder is
turned on
with the [FAW] mode selected, it takes
about 15 seconds for the colors to stabilize.
Setting the Electronic Shutter
63
Shooting