User's Manual
Table Of Contents
- Introduction
- Preparations
- Shooting
- Basic Shooting Procedures
- Selecting System Definition, File Format and Video Format
- Zoom Operation
- Focus Operation
- Adjusting the Brightness
- Adjusting the Iris
- Setting the Gain
- Setting the Electronic Shutter
- Adjusting the White Balance
- Adjusting the Camera Image
- Audio Recording
- Audio Output during Recording
- Time Code and User’s Bit
- Setting Time Code Generator
- Setting the User’s Bit
- Synchronizing the Time Code with an External Time Code Generator
- Setting Zebra Pattern
- Setting Spot Meter
- Acquiring Positioning Information by GPS
- Viewing Recorded Videos Immediately (Clip Review)
- Displaying the Video Signal Monitor
- Recording Simultaneously at Two Different Definitions
- Series Rec
- Dual Rec
- Backup Rec
- Special Recording
- Splitting the Clips Freely (Clip Cutter Trig)
- Playback
- Menu Display and Detailed Settings
- Display/Status Screen
- Camera Features
- Connecting External Devices
- Connecting to the Network
- Functions of Network Connection
- Preparing Network Connection
- Importing Metadata
- Uploading a Recorded Video Clip
- FTP Resume Feature
- Connecting from a Web Browser
- Editing Metadata
- Uploading a Recording Clip via a Web Browser
- View Remote Control and Camera Control Functions
- Changing the Settings via a Web Browser
- Managing the Network Connection Settings File
- Performing Live Streaming
- Return Video/Audio from the Network (Return over IP)
- IFB (Return Audio)
- Others
Audio Output during
Recording
0
You can check the recorded audio from the
monitor
speaker
or the headphone connected to
the [PHONE] terminal.
0
Adjust the
volume of the speaker or headphone
using the [MONITOR] volume adjustment knob.
.
Memo :
0
Warning tone is output when there is an
abnormality in
the camera recorder or when the
battery is low.
(A P222 [Warning Tone] )
0
The volume
of the warning tone can be adjusted
using the [ALARM] volume adjustment knob or
configured in [A/V Set] B [Audio Set] B [Min.
ALARM Level].
(A P137
[ Min. ALARM Level ] )
Time Code and User’s Bit
Time code
and user’s bit data are recorded with the
video in this camera recorder.
The time code and user’s bit are displayed on the
viewfinder and LCD monitor during playback or
recording. (Display screen)
Displaying Time Code and User’s Bit
The time code and user’s bit are displayed on the
viewfinder and LCD monitor during playback or
recording.
The display
differs according to the menu settings.
1
Set [LCD/VF] B [Display On/Off] B [
TC/UB]
to “On”.
(
A P
130 [Display On/Off Item] )
When “TC
” or “UB” is selected, time code or
user’s bit data is displayed respectively on the
display screen.
.
100min
50min
282min
1
/60
F2.8
AE
±0
ND1
/64
12 :34 :56
ISO
102400
00: 00: 00.00
1080 /30p
SDI IN
ITU709
COMPRESS
5 . 6 f t
B 5600
K
00H 00M 00S 00F
AB CD EF 89
2
Select the display using the [TC DISPLAY]
TC/UB display switch.
Select time code display ([TC]) or user’s bit
display ([UB
]).
Audio Output during Recording
73
Shooting