User's Manual

Setting the User’s Bit
You can add the date, time or an 8-digit
hexadecimal number as the user’s bit to the
recorded image.
Selecting a Recording Mode
Recording date/time information to the user’s
bit
1
Set [TC/UB] B [UB Mode]
to “Date” or
“Time”, and press the Set button (R).
(A P124
[ UB Mode ] )
The date or time information is recorded to the
user’s bit.
Memo :
0
When “Date” or “Time”
is set, [Preset] appears
as “-” and cannot be set.
0
“Time”
is displayed in the 24-hour format.
Presetting the User’s Bit
Recording arbitrary information (8-digit
hexadecimal) to the user’s bit
1
Set [TC/UB] B [UB Mode
] to “Preset”, and
press the Set button (R).
(A P124 [ UB Mode ] )
.
1
TC/UB
UB Mode
Preset
Time
Preset
Date
Memo :
0
When the [TC GEN]
switch is set to “REGEN”,
the parameter is displayed as “REGEN” and
selection is disabled.
2
Select [TC/UB] B “Preset”
and press the Set
button (R).
The [Preset] setting screen appears.
3
Use the cross-shaped button (HI) to
place
the cursor at the item to set, then use the
cross-shaped button (JK) to change the
values.
Numbers between 0 and 9 or alphabets
between A and F can be specified for the user’s
bit.
.
TC/UB
Cursor
Memo :
0
Press the [CANCEL/RESET] button to reset each
digit to “0”. The cursor moves to the left.
4
Check the values and press the Set button
(R).
0
The user’s bit is set and the screen returns to
[TC/UB].
0
To cancel the setting, press the [
CANCEL/
RESET] button.
5
Press the [MENU/THUMB] button.
Returns to the normal screen.
Setting the User’s Bit
77
Shooting