User's Manual
Table Of Contents
- Introduction
- Preparations
- Shooting
- Basic Shooting Procedures
- Selecting System Definition, File Format and Video Format
- Zoom Operation
- Focus Operation
- Adjusting the Brightness
- Adjusting the Iris
- Setting the Gain
- Setting the Electronic Shutter
- Adjusting the White Balance
- Adjusting the Camera Image
- Audio Recording
- Audio Output during Recording
- Time Code and User’s Bit
- Setting Time Code Generator
- Setting the User’s Bit
- Synchronizing the Time Code with an External Time Code Generator
- Setting Zebra Pattern
- Setting Spot Meter
- Acquiring Positioning Information by GPS
- Viewing Recorded Videos Immediately (Clip Review)
- Displaying the Video Signal Monitor
- Recording Simultaneously at Two Different Definitions
- Series Rec
- Dual Rec
- Backup Rec
- Special Recording
- Splitting the Clips Freely (Clip Cutter Trig)
- Playback
- Menu Display and Detailed Settings
- Display/Status Screen
- Camera Features
- Connecting External Devices
- Connecting to the Network
- Functions of Network Connection
- Preparing Network Connection
- Importing Metadata
- Uploading a Recorded Video Clip
- FTP Resume Feature
- Connecting from a Web Browser
- Editing Metadata
- Uploading a Recording Clip via a Web Browser
- View Remote Control and Camera Control Functions
- Changing the Settings via a Web Browser
- Managing the Network Connection Settings File
- Performing Live Streaming
- Return Video/Audio from the Network (Return over IP)
- IFB (Return Audio)
- Others
Memo :
0
Clips appended with OK marks cannot be
deleted on the camera recorder.
B
Continued From Mark
This mark indicates that the current clip is
continued from another SD card when
recording is divided and made on several SD
cards.
C
Uneditable Mark
0
This mark indicates that an OK mark cannot
be
appended
to or deleted from the clip, and
the clip cannot be deleted.
D
Continue Mark
This mark
indicates that recording of the current
clip is continued to another SD card when
recording is divided and made on several SD
cards.
E
Check Mark
0
A green check mark is displayed when the
clip is selected.
0
Magenta and gray check marks are
displayed in multiple selection mode.
(A
P102 [Selecting and Performing
Operations on Multiple Clips] )
C
Cursor
Clip to be worked on. Use the cross-shaped
button (
JKHI) to move the cursor.
D
Thumbnail Substitution Display
.
A B
A
A clip with corrupted management information.
It cannot be played back even if you press the
Set (Play) button.
B
A clip
that cannot be played back nor displayed
in thumbnail with the current video format
settings.
It cannot be played back even if you press the
Set (Play) button.
Memo :
0
Dependent on the settings for [System
] B
[Record Set] B [Record Format] B [System]/
[WResolution]/[YResolution]/[WFrame Rate]/
[YFrame Rate]/[WBit Rate], and [YBit Rate].
(A P151
[ System ] )
(
A P152 [ W Resolution ] )
(A P152 [ W Frame Rate ] )
(A P153 [ W Bit Rate ] )
E
Clip Name
The file
name (clip number) of the selected clip
is displayed.
F
Operation Guide
0
Displays a guide for the current operation
buttons.
0
The action selection screen is displayed
when the [USER4]
button is pressed.
(A P97 [Actions] )
G
Recording Start Time
Displays the recording start time of the clip.
Memo :
0
The date/time display is dependent on the
settings in
[System] B [Date Style]/[Time Style].
(A P150 [ Date Style ] )
(
A P150 [ Time Style ] )
H
Scroll Bar
0
Indicates the scroll position.
0
Black space below the scroll bar (white)
indicates that there are more pages.
0
When the scroll bar (white) is at the bottom,
this indicates the last page.
I
Remaining Battery Power
(A P36
[Power Status Display] )
J
Number of Clips
0
If none
of the clips are selected, the “running
number/total number of clips” of the clip to be
displayed appears.
0
Even if only one clip is selected, the number
of selected clips in the current slot is
displayed.
K
Network Connection Icon
0
The network connection status is displayed.
96
Playing Recorded Clips
Playback