INSTRUCTIONS

Detail/Adjust Item
V/H Balance
For setting the H/V balance to enhance contour
(detail) in the horizontal (H) or vertical (V) direction.
0
H+1 to H+4:
Increasing the value enhances contour in the
horizontal direction.
0
V+1 to V+4:
Increasing the value enhances contour in the
vertical direction.
[Setting Values: H+1 to H+4, RNormal, V+1 to
V+4]
Memo :
0
When [System] under [Record Format] is set to
“SD”, this item is fixed at
“Normal”.
0
When [System] under [Record Format] is set to
“HD+Web”, this item can be set during HD
recording, but will be fixed at “Normal” during SD
recording.
White Balance Item
Preset Temp.
For setting the color temperature when the
[WHT.BAL B/A/PRST] switch is set to “PRST”.
For details, refer to “[Adjusting the White Balance]
(A P 64)”.
Alternative Temp.
For setting the alternative color temperature in the
Preset mode.
When the [WHT.BAL B/A/PRST]
switch is set to
“PRST”, pressing the [AWB/9] button each time
switches the color temperature setting in the Preset
mode. ([Preset Temp.]1[Alternative Temp.])
For details, refer to “[Adjusting the White Balance]
(A P 64)”.
AWB Paint
For adjusting the
R (red)/B (blue) component in the
AWB (Auto White Balance) mode.
For details, refer to “[Adjusting the White Balance]
(A P 64)”.
0
Increase the number:
Strengthens the red/blue.
0
Decrease the number:
Weakens the red/blue.
[Setting Values: -32 to +32 (R 0)]
Memo :
0
This item is selectable when the [WHT.BAL
B/A/PRST
] switch on the right of the camera
recorder is set to “A” or “B”. When “PRST” is set,
this item appears as “---” and cannot be
selected.
0
Different values can be specified for “A” and “B”.
0
When [Clear Paint After AWB] is set to “On”,
pressing the [AWB/9] button to readjust the
white balance switches the R and B values
automatically to “0”.
Clear Paint After AWB
For specifying whether
to clear the [AWB Paint] (R
value and B value) settings after executing AWB
(Auto White Balance).
0
On:
Sets the [AWB Paint] (R value and B value)
settings to “0”
after executing AWB (Auto White
Balance).
0
Off:
Does not change the [AWB Paint] (R value and
B value) settings after executing AWB (Auto
White Balance).
[Setting Values: R
On, Off]
FAW Paint
For adjusting the R (red)/B (blue) component
during FAW (Full Auto White Balance) mode.
0
Increase the number:
Strengthens the red/blue.
0
Decrease the number:
Weakens the red/blue.
[Setting Values: -32 to +32 (R 0)]
110
Camera Process Menu
Menu Display and Detailed Settings