INSTRUCTIONS

HDMI Out M
For setting whether to output the HDMI signal.
[Setting Values: On, ROff]
9
Resolution
For selecting the
resolution of video output from the
[HDMI] terminal or [SDI OUT] terminal n m
according to the monitor to be connected.
[Setting Values: 576i, 576p, 480i, 480p, 720p,
1080i, 1080p, 1080/30p, 1080/25p, 1080/24p,
2160/24p, 2160/25p, 2160/30p]
Memo :
0
The selectable options vary according to the
setting in [System]/[W
Resolution] and [WFrame
Rate] of [System] B [Record Set] B [Record
Format].
0
Cross conversion output is not possible.
0
This item cannot be specified when
[HDMI/SDI
Out] is set to
“Off”. n m
0
This item cannot be selected when [HDMI Out]
is set to “Off
”. M
0
When the setting values are changed, the LCD
screen may become dark.
9
HDMI Color
0
For setting the color format of HDMI signals.
0
This item is selectable when [HDMI/SDI Out] is
set to “HDMI” or “HDMI+SDI”.
n m
0
This item is selectable when [HDMI Out] is set
to “On”.
[Setting Values: RGB,
RAuto]
9
HDMI Enhance
0
For setting the color range of HDMI signals.
When connecting to a PC monitor, set this to
“On”.
0
This item is selectable when [HDMI/SDI Out] is
set to “HDMI” or “HDMI+SDI”. n
m
0
This item is selectable when [HDMI Out] is set
to
“On”.
[Setting Values: On, ROff]
9
Rec Trigger
For setting whether
to superimpose trigger signals
in tandem with the [HDMI] terminal, [SDI OUT]
terminal n m and the [REC] button on the
camera body.
When a compatible device is connected,
recording/stop control signals are output in tandem
with the operation of the [REC] button.
The record trigger output status to the connected
device is indicated by REC B/STBYB on the
display screen.
0
HDMI+SDI:
Superimposes
the trigger
signals in tandem with
the [HDMI] terminal, [SDI OUT] terminal and the
[REC] button on the camera body and outputs
the recording/stop control signals to the
compatible device.
0
SDI:
Superimposes the trigger signals in tandem with
the [SDI OUT] terminal as well as the [REC]
button on the camera body and outputs the
recording/stop control signals to the compatible
device.
0
HDMI:
Superimposes the trigger signals in tandem with
the [HDMI] terminal as well as the [REC] button
on the camera body and outputs the recording/
stop control signals to the compatible device.
0
On:
Superimposes the trigger signals in tandem with
the [HDMI] terminal as well as the [REC] button
on the camera body and outputs the recording/
stop control signals to the compatible device.
0
Off:
Does not superimpose the trigger signals.
[Setting Values: ROff, HDMI, SDI, HDMI+SDI] n
m
[Setting values: ROff, On] M
Memo :
0
Even if REC B/STBYB is displayed on the
display screen, the compatible device may not
necessarily be recording.
0
When [A/V Set] B [Video Set] B [HDMI/SDI
Out] is set to “Off”,
[Rec Trigger] is fixed at “Off”
and cannot be selected. n m
0
When [A/V Set] B [Video Set] B [HDMI Out
] is
set to “Off”, [Rec Trigger] is fixed at “Off”.
M
0
When [System] B [Record
Set]
B [Rec Mode] is
set to “Interval Rec” or “Frame Rec”, [Rec
Trigger] is fixed at “Off” and cannot be selected.
0
Set to “Off” if connecting to a device that does
not support record trigger.
A/V Set Menu
117
Menu Display and Detailed Settings