INSTRUCTIONS

9
Live Streaming
Starts live distribution when “On” is selected.
[Setting Values: On, ROff]
Memo :
0
“On” cannot be selected if network connection
is not established.
0
“On” cannot be selected when FTP is running.
0
Live streaming switches
to “Off” when the power
is turned off.
9
Auto Restart
When the network is reconnected after
disconnection, live streaming will resume
automatically.
0
On:
Once
the
network
is reconnected, live streaming
resumes automatically.
0
Off:
Live streaming does not resume automatically
even when the network is reconnected.
[Setting Values: On, ROff]
Memo :
0
When the power of the camera is turned off,
regardless of the settings in [Auto Restart], live
streaming does not begin automatically even
when power is turned on again and network
connection is established.
9
Server
For selecting the server for live streaming.
[Setting Values: RServer1, Server2, Server3,
Server4]
Memo :
0
The setting cannot be changed during live
streaming (Live Streaming set to “On”).
9
Streaming Server
For setting the server for live streaming.
Memo :
0
The setting cannot be changed during live
streaming (Live Streaming set to
“On”).
9
Server1/Server2/Server3/Server4
* The name that is set in [
Alias] is displayed
individually.
o
Alias
For setting a name to distinguish the settings of
this camera recorder.
The name set
in this item will be displayed in the
[Server] options.
* The default value is “Server1/Server2/Server3/
Server4”.
* You can enter up to 31 characters and ASCII
characters.
o
Type
For setting the system to transfer videos for
distribution.
[Setting Values: RMPEG2-TS/UDP, MPEG2-TS/
RTP,
RTSP/RTP, ZIXI,
RTMP, RTMPS, Facebook
Live, YouTube Live]
Memo :
0
Use reception devices that are compatible with
the respective transfer systems.
0
To use the “ZIXI” setting, a dedicated server is
needed separately.
0
The following items that can be set vary
depending on the setting of this item.
o
Destination Address
For setting details such as the host name and
the
IP address
of the live distribution destination.
* Enter not more than 127 characters using
single-byte alphanumeric characters (a to z, 0 to
9), single-byte hyphen [-], or dot [.].
Memo :
0
When performing simultaneous streaming to
multiple destinations, set
[Type] to “MPEG2-TS/
UDP” or “MPEG2-TS/RTP” and set the
destination address to a multicast address.
o
Destination URL
For entering the URL of the live distribution
destination beginning with
“rtmp://” or “rtmps://”.
There is no default value (blank).
* You can enter up to 191 characters and ASCII
characters.
Memo :
0
Available when [Type] is set to “RTMP
” or
“RTMPS”.
128
System Menu
Menu Display and Detailed Settings