INSTRUCTIONS

NTP Set
The time of
the videos recorded simultaneously on
multiple cameras can be synchronized by
reflecting the time information retrieved from the
NTP server in the time code.
The synchronization status with the NTP server
can be checked in the Status screen (network).
Memo :
0
If the network connection is incomplete, a
different result may occur.
0
An error of about several frames may occur in
the time code information that reflects the NTP
time.
0
It may take
a while to update the synchronization
with the NTP server. To update immediately,
turn off the power first, then turn it on again.
9
TC
When “On” is selected, the NTP time will be
reflected in the time code of the camera recorder.
[Setting Values: On, ROff]
Memo :
0
[TC/UB] B [TC Generator] is fixed at “Free
Run(NTP)”.
0
[TC/UB]
B [TC Preset] is fixed at “<NTP>
”.
0
By synchronizing the
NTP server, NTP time can
be reflected in Date/Time.
(A P122 [ Date/Time ] )
9
Server Address
For setting the address of the NTP server.
If this is
not configured, “Master Mode” appears on
the Status screen (network).
Zero Config
For allowing this camera recorder to be detected
automatically by external devices (such as
switchers) connected to the same LAN.
Connection can be established via one link from
the menu of the external device.
Memo :
0
When a cellular adapter is used,
[Announcement] is fixed at “---” and the Zero
Config function is disabled.
The Zero Config function is not equipped with
the
function to change the settings of the camera
recorder.
9
Announcement
When “On” is selected, this camera recorder can
be detected automatically
from an external device.
[Setting Values: ROn, Off]
9
Hostname Prefix
Part of the host name can be changed.
It will appear in the format of “XXXX-YYYY.local”
on the Status screen (network).
XXXX : Character string (maximum 8 characters)
configured in [Hostname Prefix]
YYYY : Serial number of this camera recorder
Memo :
0
When [Announcement] is set to “Off
”, this item
does not appear on the Status screen (network).
Reset Network
Restores all items in the
[Network] menu to their
default settings.
134
System Menu
Menu Display and Detailed Settings