INSTRUCTIONS

Names of Parts
.
A
B
D
E
C
F
A
Built-in Microphone
(A P69 [Audio Recording] )
B
Handle Unit
(A
P26 [Handle Unit Section] )
Memo :
0
The handle unit is detached from the camera
recorder unit in the factory shipment.
For details on attaching the handle unit, please
refer to [Attaching the Handle Unit] .
(A P29 [Attaching the Handle Unit] )
C
[MODE] Camera/Media Mode Selection
Button
(A P20 [Operation Modes] )
D
[POWER ON/OFF] Lock Power ON/OFF Switch
Turns ON/OFF the power.
0
Hold down the
lock button (blue) in the center
to toggle ON/OFF.
0
When the power is turning OFF, “P.OFF”
appears
on the LCD monitor and viewfinder.
0
Wait for 5 seconds or more to turn on the
power again.
(A P35 [Turning On/Off the Power] )
E
[POWER/CHARGE] Power/Charging Display
Lamp
(A P32 [Using a Battery Pack] )
F
[AWB/9] Auto White Balance/User 9 Button
0
For executing Auto White Balance and
switching the registered color temperature.
(A P64 [Adjusting the White Balance] )
0
You can also use it as a user button by
assigning a specific feature in the menu
setting to this button.
.
H
L
K
M
I
J
N
G
o
Bottom
O
G
Visibility Adjustment Lever
(A P41 [Adjusting the Viewfinder] )
H
Battery
(A
P32 [Using a Battery Pack] )
I
Viewfinder
(A P41 [Adjusting the Viewfinder] )
J
Eyepiece
Prevents external light from entering the
viewfinder screen and cameraman’s vision.
K
[REC/7] Record Trigger/User 7 Button
0
Starts/stops recording.
(A
P49 [Basic Shooting Procedures] )
0
You can also use it as a user button by
assigning a specific feature in the menu
setting to this button.
L
Zoom Lever at the Grip
(A
P53 [Using the Zoom Lever at the Grip] )
M
[EXPANDED FOCUS/8
] Expanded Focus
Assist/User 8 Button
0
For switching the expanded focus ON or
OFF.
(A P55 [Expanded Focus Function] )
0
You can also use it as a user button by
assigning a specific feature in the menu
setting to this button.
N
Tally Lamp
(A
P42 [Tally Lamp] )
(A
P202 [Blinking of the Tally Lamp] )
O
Tripod Mounting Hole
(A P31 [Attaching the Tripod] )
22
Names of Parts
Introduction