INSTRUCTIONS

Assignment of Functions
to User Buttons
You can assign functions to the following buttons
and use them as user buttons.
By assigning functions
to the buttons, the usability
of the camera recorder can be enhanced.
Perform settings in the menu items corresponding
to each button.
Button Menu Item
[F.ASSIST/1] Button [USER1]
[TC/2] Button [USER2]
[LOLUX/3] Button [USER3]
[C.REVIEW/4] Button [USER4]
[ZEBRA/5] Button [USER5]
[OIS/6] Button [USER6]
[REC/7] Button [USER7]
[EXPANDED FOCUS/8] Button [USER8]
[AWB/9] Button [USER9]
LCD Cross-Shaped Button (J)
[LCD KEY▲]
LCD Cross-Shaped Button (K)
[LCD KEY▼]
LCD Cross-Shaped Button (H)
[LCD KEY◀]
LCD Cross-Shaped Button (I)
[LCD KEY▶]
.
1
Assign functions to the buttons from the
menu.
Specify each item in [Camera Function] B [User
Switch
Set] B [USER1]-[USER9], [LCD KEY▲],
[LCD KEY▶], [LCD KEY▼], [LCD KEY◀].
(A P105 [User Switch Set Item] )
Memo :
0
Operations of the user buttons are interlocked
with the menu settings.
0
When the menu screen is displayed, these
buttons function as
the menu operation buttons.
(A P97 [Basic Operations in Menu Screen] )
Tally Lamp
This is the indicator lamp for recording and
warning.
The operation changes according to the menu
settings.
The lamp blinks when the battery or remaining
space on the SD card is low. (Camera mode only)
*
Specify the setting in [System] B [Tally Lamp
].
(A
P122 [ Tally Lamp ] )
.
Tally Lamp
(Front)
Handle Tally
Lamp
Menu Setting Tally Lamp Off On
Functional
information
Warning -
J
Caution -
o
Recording status Recording -
R
Special recording * -
R
R
:
Lights up
J
:
Blinks four times in 1 second
o
:
Blinks once in 1 second
*
Paused state during special recording ([Clip
Continuous]
).
(A P83 [Clip Continuous Rec] )
Memo :
0
Blinking takes priority over lighting up.
42
Assignment of Functions to User Buttons
Preparations