INSTRUCTIONS
Table Of Contents
- Introduction
- Preparations
- Shooting
- Basic Shooting Procedures
- Selecting System Definition, File Format and Video Format
- Zoom Operation
- Focus Operation
- Adjusting the Focusing by Face Detection
- Adjusting the Brightness
- Adjusting the Iris
- Setting the Gain
- Setting the Electronic Shutter
- Setting the ND Filter
- Adjusting the White Balance
- Adjusting the Camera Image
- Using the Image Stabilizer
- Audio Recording
- Monitoring Audio Sound During Recording Using a Headphone
- Time Code and User’s Bit
- Setting Time Code Generator
- Setting the User’s Bit
- Setting Zebra Pattern
- Viewing Recorded Videos Immediately (Clip Review)
- Using the Histogram
- Recording Simultaneously at Two Different Definitions
- Series Rec
- Dual Rec
- Backup Rec
- Special Recording
- Splitting the Clips Freely (Clip Cutter Trig)
- Playback
- Menu Display and Detailed Settings
- Display/Status Screen
- Camera Features
- Connecting External Devices
- Connecting to the Network
- Functions of Network Connection
- Preparing Network Connection
- Importing Metadata
- Uploading a Recorded Video Clip
- FTP Resume Feature
- Connecting from a Web Browser
- Editing Metadata
- Uploading a Recording Clip via a Web Browser
- View Remote Feature
- Camera Control Function
- Configuring Settings via a Browser
- Managing the Network Connection Settings File
- Performing Live Streaming
- Logging in to Facebook
- Live Streaming on Facebook Live
- Logging in to YouTube
- Live Streaming on YouTube Live
- Broadcast Overlay
- Others
Adjusting the White
Balance
Adjust the white balance according to the color
temperature of the lighting. You can select the
adjustment mode according to the shooting
conditions.
As the color of the light (color temperature) varies
according to the light source, it is necessary to
readjust the white balance when the main light
source illuminating the subject changes.
.
Automatic White Balance Mode (FAW:
Fulltime Auto White balance)
1
Press and hold the [FULL AUTO] button to
set Full Auto mode to off.
2
Assign “FAW” (Full Auto White
Balance) to
one of the three [WHT.BAL B/A/PRST]
switches.
0
You can set the Full Auto White Balance
feature to either “A”, “B”, or “PRST” in
[Camera Function]
B [FAW].
(A P103 [ FAW ] )
0
If the position assigned with “FAW” is
selected using the [WHT BAL B/A/PRST]
switch,
the
Automatic White Balance mode is
enabled and an appropriate white balance is
automatically adjusted according to the color
temperature of the lighting on the subject.
Caution :
0
The
accuracy
of
[FAW] is inferior to that of [AWB]
(Auto White Balance).
0
When the power of the camera recorder is
turned on with the [FAW] mode selected, it takes
about 15 seconds for the colors to stabilize.
Memo :
0
Pressing and holding the [FULL AUTO] button
to enter the Full Auto mode also activates the
Automatic White Balance
mode. In this case, the
Iris, Gain and Shutter also enter into Auto mode
forcibly.
0
Switching of the white balance with the
[WHT.BAL B/A/PRST] switch is disabled in the
Full Auto mode.
0
When [Camera Function] B [User Switch Set] B
[AE/FAW Lock] is set to “AE/FAW” or “FAW”, the
white balance when the user button that is
assigned with [AE/FAW Lock] is pressed can be
fixed while in the Automatic White Balance
mode.
(A P106 [ AE/FAW Lock ] )
0
If [White Balance] is
assigned to the user button,
pressing the assigned user button will display
the FAW Paint Adjustment screen.
(A P42 [Assignment of Functions to User
Buttons] )
FAW Paint Adjustment
You can fine-adjust the white balance that was
automatically adjusted.
1
Select [Camera Process] B [White
Balance]
B [FAW Paint] and press the Set
button (R).
The FAW Paint Adjustment screen appears.
.
1
FAW Paint
White Balance
2
Adjust the R and B values.
Use the cross-shaped button (JK) to adjust R
value and (HI) to adjust B value.
.
B
R
64
Adjusting the White Balance
Shooting