INSTRUCTIONS

Dual Rec
0
If
both the
slots are loaded with recordable cards
in the Dual Rec mode ([Slot Mode] is set to
“Dual”), pressing the [REC] button starts
recording simultaneously to the media in both
the slots.
0
The clips recorded to the media in both the slots
are identical, and two clips of the same content
can be created only on this camera recorder.
(A P126 [ Slot Mode ] )
.
Setting to Dual Rec Mode
1
Set [System] B [Record Set]
B [Slot Mode]
to “Dual”.
(A P126 [ Slot Mode ] )
“DUAL” appears on the display screen.
.
1/100
F1. 6
18
dB
AE+6
ND 1 /1 6
12 :34 :56
Jan 24,2015
00:00: 00.00
4030 20 10 0
5 . 6 f t
P 15000K
DUAL
2
Start recording.
0
Insert recordable media in both slots, and
press the [REC] button.
0
In
the Dual
Rec mode, recording to the media
in both slots starts at the same time.
0
Both the card slot marks turn red, and the
status indicators of both the card slots also
light up in red.
.
1/100
F1. 6
18
dB
AE+6
ND 1 /1 6
12 :34 :56
Jan 24,2015
00: 00: 00.00
4030 20 10 0
5 . 6 f t
P 15000K
100min
50min
REC
Lit in red
3
Stop recording.
0
Press the [REC] button again.
0
Recording to both slots stops, and both the
card slot marks turn white.
0
The same clips are recorded to both cards.
.
1/100
F1. 6
18
dB
AE+6
ND 1 /1 6
12 :34 :56
Jan 24,2015
00:00: 00.00
4030 20 10 0
5 . 6 f t
P 15000K
100min
50min
White
Memo :
0
Available when [System] is set to “4K”, “HD”,
“SD
” or “High-Speed”.
(A P123 [ System ] )
0
During recording in
the Dual Rec mode, both the
card slot marks light up in red.
0
During recording in the Dual Rec mode to two
cards with a different amount of remaining
space, if the space of one card runs out,
recording to both slots will stop automatically.
After recording stops, recording automatically
resumes for the card with remaining space.
Although the clips are separated in this case, the
clips can be seamlessly joined by arranging
them on the timeline of the editing software since
they are recorded seamlessly.
0
If the last clip on the cards that are inserted in the
two slots are different from each other, and the
time code operating mode is set to “Regen”, the
Regen mode for the selected card slot will be
enabled in the next recording.
Dual Rec
79
Shooting