INSTRUCTIONS

3
Pause recording.
0
Press the
[REC]
button again to pause
recording. The display changes (“RRECC”
B “STBYC” (yellow text)).
0
The
card slot
status indicator remains lighted
in red.
Memo :
0
When the [CANCEL/STOP] button is pressed
while the camera
recorder is paused (STBYC),
the display changes (“STBYC” (yellow text) B
“STBYC” (blinking yellow text) B “STBYC”
(white text)), and a “clip” is generated. The card
slot status indicator lights up in green.
4
Resume recording. (Recording 2)
0
Press the
[REC]
button again to resume
recording. The display changes (“STBYC”
(yellow text) B “RRECC”).
0
The
card slot
status indicator remains lighted
in red.
5
Pause recording.
0
Press the [REC] button again to pause
recording. The display changes (“RRECC”
B “STBYC” (yellow text)).
0
The
card slot
status indicator remains lighted
in red.
6
Resume recording. (Recording 3)
0
Press the [REC]
button again to resume
recording. The display changes (“STBYC”
(yellow text) B “RRECC”).
0
The
card slot
status indicator remains lighted
in red.
7
Press and hold the [REC] button.
0
Recording stops and the display changes
(“RRECC” B “STBYC”). A “clip” is
generated.
0
The card slot status indicator lights up in
green.
8
Press the [REC]
button again.
0
The display changes (
“STBYC
” B
“RRECC”) and the card slot status indicator
lights up in red.
0
A new “clip” is generated from here.
Memo :
0
The following operations cannot be performed
while recording is
paused (STBYC, yellow text).
0
Clip Review operation
(A P77 [Viewing Recorded Videos
Immediately (Clip Review)] )
0
Switching SD card slots
0
Switching operation mode
(A
P20 [Operation Modes] )
0
Files are split into sizes of 4 GB (or 30 minutes)
regardless of the menu settings.
Caution :
0
Do not remove the SD card during recording
(RRECC, red text) or recording pause
(STBYC, yellow text).
0
To
remove the
SD card in the “Clip Continuous”
mode, press the [CANCEL/STOP] button,
check that “STBYC” (white text) is displayed
and the card slot status indicator lights up in
green before you remove the card.
0
When the SD card becomes full during
recording, recording stops and “STOP” is
displayed.
0
When
the [POWER ON/OFF] switch is turned off
during recording or recording pause, recording
stops and power is cut off after a clip is
generated.
0
If the power is cut off due to low battery power,
a proper clip may not be generated.
84
Special Recording
Shooting