INSTRUCTIONS
Table Of Contents
- Introduction
- Preparations
- Shooting
- Basic Shooting Procedures
- Selecting System Definition, File Format and Video Format
- Zoom Operation
- Focus Operation
- Adjusting the Focusing by Face Detection
- Adjusting the Brightness
- Adjusting the Iris
- Setting the Gain
- Setting the Electronic Shutter
- Setting the ND Filter
- Adjusting the White Balance
- Adjusting the Camera Image
- Using the Image Stabilizer
- Audio Recording
- Monitoring Audio Sound During Recording Using a Headphone
- Time Code and User’s Bit
- Setting Time Code Generator
- Setting the User’s Bit
- Setting Zebra Pattern
- Viewing Recorded Videos Immediately (Clip Review)
- Using the Histogram
- Recording Simultaneously at Two Different Definitions
- Series Rec
- Dual Rec
- Backup Rec
- Special Recording
- Splitting the Clips Freely (Clip Cutter Trig)
- Playback
- Menu Display and Detailed Settings
- Display/Status Screen
- Camera Features
- Connecting External Devices
- Connecting to the Network
- Functions of Network Connection
- Preparing Network Connection
- Importing Metadata
- Uploading a Recorded Video Clip
- FTP Resume Feature
- Connecting from a Web Browser
- Editing Metadata
- Uploading a Recording Clip via a Web Browser
- View Remote Feature
- Camera Control Function
- Configuring Settings via a Browser
- Managing the Network Connection Settings File
- Performing Live Streaming
- Broadcast Overlay
- Others
9
Level
This item can be specified separately when
[Gamma]
is set to “Standard” or “Cinema”.
0
Increase the number:
Enhances the gradation of black. However, the
gradation of bright areas deteriorates.
0
Decrease the number:
Enhances the gradation of bright areas.
However, the gradation of black deteriorates.
[Setting Values: -5 to +5 (R 0)]
Highlight Display Priority n
Gamma curve adjustment used for cinematic
shooting can be set directly.
This function
can be assigned to each user switch.
0
On:
Sets gamma curve adjustment for cinematic
shooting.
0
Off:
Sets to a standard gamma curve.
[Setting Values: On, ROff]
Memo :
0
The following menu cannot be changed when
“On” is selected.
WDR, Gamma, Knee, Master Black
WDR
For setting the WDR (Wide Dynamic Range)
function.
When shooting object with wide dynamic range
due to backlight conditions, this function
compresses the dynamic range while maintaining
image contrast through providing gradation
compensation to the input video signals.
0
Strong:
Enhances the
effect of gradation compensation
for object with wide dynamic range due to
outdoor or strong backlight conditions.
0
Natural:
Normal setting for wide dynamic range.
0
Weak:
Reduces the effect of gradation compensation
compared to the normal setting.
0
Off:
Sets the wide dynamic range function to “Off”.
[Setting Values: Strong, Natural, Weak, ROff]
Memo :
0
When [WDR] is set to other than “Off”, [Black
Toe], [
Knee], [Gamma] and [White Clip] cannot
be selected.
White Balance...
Menu for adjusting white balance.
(A P105 [White Balance Item] )
*
For details, refer to “[Adjusting the White
Balance] (A P
61
)”.
Color Matrix
For setting the color matrix.
0
Natural:
Sets to a brighter and more natural color matrix
than the standard. Effective for shooting under
a strong single color light source such as stage
lightings.
0
Cinema Subdued:
Sets to a subdued color matrix that is similar to
the screen characteristics of movies.
0
Cinema Vivid:
Sets to a vivid color matrix that is similar to the
screen characteristics of movies.
0
Standard:
Sets to a standard color matrix.
[Setting Values: Natural, Cinema Subdued,
Cinema Vivid, RStandard]
9
Adjust
This item is used to adjust [Color Matrix
] to a color
according to the user’s preference.
0
This item is used to adjust [Color Matrix
] to a
color according to the user’s preference.
0
The saturation, hue and brightness of the
primary and complementary colors (6 colors in
total) can be set individually.
0
The adjusted values of “Natural”, “Standard”,
“
Cinema Vivid”, and “Cinema Subdued” in
[Color Matrix] can be stored individually.
(A P142
[Adjusting Color Matrix] )
[Setting
range for Lightness/Saturation: -10 to +10]
(roughly ± 10 %)
[Setting range for Hue: -5 to +5] (roughly ± 5°)
Memo :
0
This item cannot be selected when [Color
Matrix] is set to
“Off”.
0
When “Natural
”
is selected, the setting range for
[Saturation] and [Lightness] is -5 to 0 to +5.
Color Gain
For adjusting the video signal color level.
Increasing the value deepens the color.
[Setting Values: -50 to +15, Off (R0)]
Memo :
0
Images are displayed in black-and-white when
this is set to “Off
”.
Reset Process
Restores all items in the [Camera Process
] menu
to their default settings.
104
Camera Process Menu
Menu Display and Detailed Settings