INSTRUCTIONS
Table Of Contents
- Introduction
- Preparations
- Shooting
- Basic Shooting Procedures
- Selecting System Definition, File Format and Video Format
- Zoom Operation
- Focus Operation
- Adjusting the Focusing by Face Detection
- Adjusting the Brightness
- Adjusting the Iris
- Setting the Gain
- Setting the Electronic Shutter
- Setting the ND Filter
- Adjusting the White Balance
- Adjusting the Camera Image
- Using the Image Stabilizer
- Audio Recording
- Monitoring Audio Sound During Recording Using a Headphone
- Time Code and User’s Bit
- Setting Time Code Generator
- Setting the User’s Bit
- Setting Zebra Pattern
- Viewing Recorded Videos Immediately (Clip Review)
- Using the Histogram
- Recording Simultaneously at Two Different Definitions
- Series Rec
- Dual Rec
- Backup Rec
- Special Recording
- Splitting the Clips Freely (Clip Cutter Trig)
- Playback
- Menu Display and Detailed Settings
- Display/Status Screen
- Camera Features
- Connecting External Devices
- Connecting to the Network
- Functions of Network Connection
- Preparing Network Connection
- Importing Metadata
- Uploading a Recorded Video Clip
- FTP Resume Feature
- Connecting from a Web Browser
- Editing Metadata
- Uploading a Recording Clip via a Web Browser
- View Remote Feature
- Camera Control Function
- Configuring Settings via a Browser
- Managing the Network Connection Settings File
- Performing Live Streaming
- Broadcast Overlay
- Others
Detail/Adjust Item
V/H Balance
For setting the H/V balance to enhance contour
(detail)
in
the horizontal (H) or vertical (V) direction.
0
H+1 to H+4:
Increasing the value enhances contour in the
horizontal direction.
0
V+1 to V+4:
Increasing the value enhances contour in the
vertical direction.
[Setting Values: H+1 to H+4, RNormal, V+1
to V+4]
Memo :
0
When [System] under [Record Format] is set to
“SD
”, this item is fixed at “Normal”.
0
When [System] under [Record Format
] is set to
“HD+Web
”, this item can be set during HD
recording, but will be fixed at “Normal” during SD
recording.
White Balance Item
Preset Temp.
For setting the color temperature when the
[WHT.BAL B/A/PRST]
switch is set to “PRST”.
For details, refer to “[Adjusting the White Balance]
(A P 61)”.
Alternative Temp.
For setting the alternative color temperature in the
Preset mode.
When the [WHT.BAL B/A/PRST]
switch is set to
“PRST”, pressing the [AWB/9] button each time
switches the color temperature setting in the Preset
mode. ([Preset Temp.]1[Alternative Temp.])
For details, refer to “[Adjusting the White Balance]
(A P 61)”.
AWB Paint
For adjusting
the R (red)/B (blue) component in the
AWB (Auto White Balance) mode.
For details, refer to “[Adjusting the White Balance]
(A P 61)”.
0
Increase the number:
Strengthens the red/blue.
0
Decrease the number:
Weakens the red/blue.
[Setting Values: -32 to +32 (R 0)]
Memo :
0
This item is selectable when the [
WHT.BAL
B/A/PRST] switch on the right of the camera
recorder is set to “A” or “B”. When “PRST” is set,
this item appears as “---” and cannot be
selected.
0
Different values can be specified for “A” and “B”.
0
When [Clear Paint After AWB] is set to “On”,
pressing the [AWB/9] button to readjust the
white balance switches the R and B values
automatically to “0”.
Clear Paint After AWB
For specifying
whether to clear the [AWB Paint] (R
value and B value) settings after executing AWB
(Auto White Balance).
0
On:
Sets the [AWB Paint] (R value and B value)
settings to
“0” after executing AWB (Auto White
Balance).
0
Off:
Does not change the [AWB Paint
] (R value and
B value) settings after executing AWB (Auto
White Balance).
[Setting Values:
ROn, Off]
FAW Paint
For adjusting the R (red)/B (blue) component
during FAW (Full Auto White Balance) mode.
0
Increase the number:
Strengthens the red/blue.
0
Decrease the number:
Weakens the red/blue.
[Setting Values: -32 to +32 (R 0)]
Camera Process Menu
105
Menu Display and Detailed Settings