User Manual

Detail/Adjust Item
V/H Balance
For setting the H/V balance to enhance contour
(detail)
in
the horizontal (H) or vertical (V) direction.
0
H+1 to H+4:
Increasing the value enhances contour in the
horizontal direction.
0
V+1 to V+4:
Increasing the value enhances contour in the
vertical direction.
[Setting Values: H+1 to H+4, RNormal, V+1
to V+4]
Memo :
0
When [System] under [Record Format] is set to
“SD
”, this item is fixed at “Normal”.
0
When [System] under [Record Format
] is set to
“HD+Web
”, this item can be set during HD
recording, but will be fixed at “Normal” during SD
recording.
White Balance Item
Preset Temp.
For setting the color temperature when the
[WHT.BAL B/A/PRST]
switch is set to “PRST”.
For details, refer to “[Adjusting the White Balance]
(A P 61)”.
Alternative Temp.
For setting the alternative color temperature in the
Preset mode.
When the [WHT.BAL B/A/PRST]
switch is set to
“PRST”, pressing the [AWB/9] button each time
switches the color temperature setting in the Preset
mode. ([Preset Temp.]1[Alternative Temp.])
For details, refer to “[Adjusting the White Balance]
(A P 61)”.
AWB Paint
For adjusting
the R (red)/B (blue) component in the
AWB (Auto White Balance) mode.
For details, refer to “[Adjusting the White Balance]
(A P 61)”.
0
Increase the number:
Strengthens the red/blue.
0
Decrease the number:
Weakens the red/blue.
[Setting Values: -32 to +32 (R 0)]
Memo :
0
This item is selectable when the [
WHT.BAL
B/A/PRST] switch on the right of the camera
recorder is set to “A” or “B”. When “PRST” is set,
this item appears as “---” and cannot be
selected.
0
Different values can be specified for “A” and “B”.
0
When [Clear Paint After AWB] is set to “On”,
pressing the [AWB/9] button to readjust the
white balance switches the R and B values
automatically to “0”.
Clear Paint After AWB
For specifying
whether to clear the [AWB Paint] (R
value and B value) settings after executing AWB
(Auto White Balance).
0
On:
Sets the [AWB Paint] (R value and B value)
settings to
“0” after executing AWB (Auto White
Balance).
0
Off:
Does not change the [AWB Paint
] (R value and
B value) settings after executing AWB (Auto
White Balance).
[Setting Values:
ROn, Off]
FAW Paint
For adjusting the R (red)/B (blue) component
during FAW (Full Auto White Balance) mode.
0
Increase the number:
Strengthens the red/blue.
0
Decrease the number:
Weakens the red/blue.
[Setting Values: -32 to +32 (R 0)]
Camera Process Menu
105
Menu Display and Detailed Settings