User Manual
Table Of Contents
- Introduction
- Preparations
- Shooting
- Basic Shooting Procedures
- Selecting System Definition, File Format and Video Format
- Zoom Operation
- Focus Operation
- Adjusting the Focusing by Face Detection
- Adjusting the Brightness
- Adjusting the Iris
- Setting the Gain
- Setting the Electronic Shutter
- Setting the ND Filter
- Adjusting the White Balance
- Adjusting the Camera Image
- Using the Image Stabilizer
- Audio Recording
- Monitoring Audio Sound During Recording Using a Headphone
- Time Code and User’s Bit
- Setting Time Code Generator
- Setting the User’s Bit
- Setting Zebra Pattern
- Viewing Recorded Videos Immediately (Clip Review)
- Recording Simultaneously at Two Different Definitions
- Series Rec
- Dual Rec
- Backup Rec
- Special Recording
- Splitting the Clips Freely (Clip Cutter Trig)
- Playback
- Menu Display and Detailed Settings
- Display/Status Screen
- Camera Features
- Connecting External Devices
- Connecting to the Network
- Functions of Network Connection
- Preparing Network Connection
- Importing Metadata
- Uploading a Recorded Video Clip
- Connecting from a Web Browser
- Editing Metadata
- Uploading a Recording Clip via a Web Browser
- View Remote Feature
- Camera Control Function
- Configuring Settings via a Browser
- Managing the Network Connection Settings File
- Performing Live Streaming
- Others
Memo :
0
You can specify whether to display the time
code, user’s bit, or turn off the display in
[LCD/VF] B [Display Settings
] B [TC/UB].
This item will not be displayed when “Off” is
selected.
(A P
107 [ TC/UB ] )
W
Live streaming mark K
When [Main Menu] B [System] B [Network]/
[Settings] B [Live Streaming Set
] B [Live
Streaming] is set to “On”, the distribution status
is displayed.
(A P119 [ Live Streaming ] )
Icon Status
.
(Red)
Distribution in progress (good
connection quality)
.
(Red)
Distribution in progress (poor
connection quality)
.
(Yellow)
Connection pending or
connection failed
X
Event/Warning Display Area
Displays error messages.
(A P170 [Error Messages and Actions] )
Y
Media Status
---- : No card found in the selected
slot
STBY : Recording standby
RREC : Recording
REVIEW : Clip Review
(A P73 [Viewing Recorded Videos Immediately
(Clip Review)] )
STBY P : Pre Rec recording standby
(A P78 [Pre Rec] )
RRECP : Pre Rec recording
(A P78 [Pre Rec] )
STBY C : Clip Continuous Rec recording
standby
(A P79 [Clip Continuous Rec] )
RRECC : Clip
Continuous Rec recording
(A P79 [Clip Continuous Rec] )
STBYC
(displayed in
yellow)
: Clip Continuous Rec recording
pause
(A P79 [Clip Continuous Rec] )
STBY N : Interval Rec recording standby
(A P81 [Interval Rec] )
STBYN
(displayed in
red)
: Interval recording pause
RRECN : Interval Rec recording
(A P81 [Interval Rec] )
STBY M : Frame Rec recording standby
(A P80 [Frame Rec] )
RRECM : Frame Rec recording
(A P80 [Frame Rec] )
STBYM
(displayed in
yellow)
: Frame Rec recording pause
(A P80 [Frame Rec] )
STOP : Unable to record to the card in
the slot
P.OFF : Power OFF
Z
Dual Rec/Backup Rec Display
“DUAL” is displayed in the Dual Rec mode and
“BACKUP” is displayed in the Backup Rec
mode.
(A P117 [ Slot Mode ] )
Memo :
0
This item is not displayed when
[Slot Mode] is
set to “Series”.
0
This item is not displayed when
[Main Menu] B
[LCD/VF] B [Display Settings] B [Media
Remain] is set to “Off”. However, warnings will
be displayed.
(A P
107 [ Media Remain ] )
0
Displayed in the Display 0 and Display 1 screens
during warnings only. (When the remaining time
is shorter than 3 minutes)
a
SDI Record Trigger K
STBY B :
When [SDI Rec Trigger] is set to
“On” and recording is stopped
REC B : When [SDI Rec Trigger] is set to
“On” and recording is in progress
Display Screen in Camera Mode
131
Display/Status Screen