INSTRUCTIONS(Basic)

4
Press the Set button (R) after confirming
the exit screen.
The [Initial Setting] screen appears.
0
For U models
.
Set
UTC-05:00
Initial Setting
0
For E models
.
Set
UTC
Initial Setting
Memo :
0
The [Initial Setting] screen appears when the
power
is turned on for the first time and when the
power is turned on after the built-in battery is fully
discharged.
0
The configured date/time data is saved in the
built-in rechargeable battery even if the power is
turned off.
5
Set the time zone and date/time.
A
Move the cursor with the cross-shaped button
(HI) and select the setting item.
B
Change the values with the cross-shaped
button (JK).
6
Press the Set button (R) after setting is
complete.
The clock is set to 0 seconds of the input date/
time.
Memo :
0
The configured date/time data can be displayed
on the LCD monitor and viewfinder and be
recorded to the SD card.
0
The value of the year can be set in the range of
“2000” to “2099”.
Usable Cards
Format Setting and Usable SD Card
Combinations
System Format Bit Rate
Usable
SD Card
High-
Speed
QuickTime 50M (XHQ)
35M (UHQ)
UHS-I U3
or higher
4K 150M
70M Class 10
or higher
HD 50M (YUV422),
50M (XHQ)
35M (UHQ) Class 6 or
higher
AVCHD - Class 4 or
higher
Exchange* -
SD - -
Web - -
Caution :
0
Using cards other than those from Panasonic,
TOSHIBA or SanDisk may result in recording
failure or data loss.
0
If an
UHS-I card with no classification indication
is used, it may not be possible to perform HD
recording.
18
Configuring the Initial Settings
Preparations