INSTRUCTIONS(Basic)

S
Focus Assist
0
“FOCUS”
is displayed when auto focus is
activated.
0
When ACCU-Focus is enabled, “ACCU-
FOCUS” blinks for about 10 seconds while
Focus Assist starts up, after which the
“FOCUS” indicator lights up.
0
If recording starts while [ACCU-Focus] is
active, [ACCU-Focus] will be forcibly
deactivated.
Memo :
0
Displayed in the Display 0 screen only when
there is a change.
T
Date/Time Display
Displays the current date and time.
Memo :
0
The date/time display style can be specified in
[LCD/VF] B [Display Settings]
B [Date Style]/
[Time Style].
0
This item is not displayed when [LCD/VF]
B
[Display Settings] B [Date/Time] is set to “Off”.
0
When [System
] B
[Record Set] B [Time Stamp]
is set to “On”, this item is not displayed.
U
Zoom Display
0
Displays the zoom position. (Zoom bar or
value)
Dynamic Zoom Off:
.
Dynamic Zoom On:
.
0
The zoom bar will only be displayed for 3
seconds after the zoom operation is
activated.
0
The value will always be displayed.
0
Dynamic Zoom Off: Z00 to Z99
(During concurrent use of electronic image
stabilizer: Z10 to Z105)
0
Dynamic Zoom On: Z00 to Z149
(During concurrent use of electronic image
stabilizer: Z10 to Z149)
Dynamic Zoom Off : Z00 to 99
Dynamic Zoom On :
Z100 to 149
Memo :
0
You can specify the display method (Number/
Bar) in
[LCD/VF] B [Display Settings] B “Zoom”.
This item will not be displayed when “Off” is
selected.
0
Displayed in the Display 0 screen only when
there is a change.
V
Network Connection Icon n
The network connection status is displayed
when [System] B [Network] is set to “On”.
This icon
is not displayed when “Off” is selected.
Icon Status
.
(Blink)
Connection is not established
(starting up, preparing for
connection)
.
(Yellow)
Connection is not established
(preparing for connection)
.
Connection is established
.
When a USB adapter different
from the connection settings is
detected
(No display) When an incompatible USB
adapter is detected, or when
[Network] is set to “Off
”
Memo :
0
When a cellular adapter that supports LTE
connection display
is in use, “LTE” will appear to
the left of the above icon when LTE connection
is detected.
W
Time Code (I)/User’s Bit (J) Display
0
Displays the time code (hour: minute:
second: frame) or user’s bit data.
0
Example of time code display:
.
00:00:00:00
*
* Colon (:) denotes non-drop frames and dot
(.) denotes drop frames.
0
Example of user’s bit display:
.
FF EE DD 20
Memo :
0
You can specify whether to display the time
code, user’s bit, or turn off the display in
[LCD/VF] B [Display Settings]
B [TC/UB].
This item will not be displayed when “Off” is
selected.
X
Time Code Lock Indicator
When the built-in time code generator is
synchronized with the external time code data
input, Z lights up.
32
Display Screen
Others