INSTRUCTIONS
Table Of Contents
- Introduction
- Preparations
- Shooting
- Basic Shooting Procedures
- Selecting System Definition, File Format and Video Format
- Zoom Operation
- Focus Operation
- Adjusting the Focusing by Face Detection
- Adjusting the Brightness
- Adjusting the Iris
- Setting the Gain
- Setting the Electronic Shutter
- Setting the ND Filter
- Adjusting the White Balance
- Adjusting the Camera Image
- Using the Image Stabilizer
- Audio Recording
- Monitoring Audio Sound During Recording Using a Headphone
- Time Code and User’s Bit
- Setting Time Code Generator
- Setting the User’s Bit
- Setting Zebra Pattern
- Viewing Recorded Videos Immediately (Clip Review)
- Using the Histogram
- Recording Simultaneously at Two Different Definitions
- Series Rec
- Dual Rec
- Backup Rec
- Special Recording
- Splitting the Clips Freely (Clip Cutter Trig)
- Playback
- Menu Display and Detailed Settings
- Display/Status Screen
- Camera Features
- Connecting External Devices
- Connecting to the Network
- Functions of Network Connection
- Preparing Network Connection
- Importing Metadata
- Uploading a Recorded Video Clip
- FTP Resume Feature
- Connecting from a Web Browser
- Editing Metadata
- Uploading a Recording Clip via a Web Browser
- View Remote Feature
- Camera Control Function
- Configuring Settings via a Browser
- Managing the Network Connection Settings File
- Performing Live Streaming
- Logging in to Facebook
- Live Streaming on Facebook Live
- Logging in to YouTube
- Live Streaming on YouTube Live
- Broadcast Overlay
- Others
Password Lock
The Overlay Settings menu can be locked with a
password.
0
On:
A password is required to open the Overlay
Settings menu.
0
Off:
Opens the Overlay Settings menu without a
password.
[Setting Values: On, ROff]
Caution :
0
Do not forget the password that you have set. If
the password is lost or forgotten, you cannot
deactivate the password protection function.
Camera Function Menu
Menu screen for specifying operation settings
during shooting.
This item can only be selected in the Camera
mode.
Bars
For setting whether to output color bars.
[Setting Values: On, ROff]
Memo :
0
The audio test signals (1 kHz) can be output
simultaneously with the color bar output.
(A P121 [ Test Tone ] )
OIS
For setting whether to enable image stabilizer.
[Setting Values: High, RNormal, Off]
(A P68
[Using the Image Stabilizer] )
Memo :
0
When “High” is selected, correcting severe
camera shake may cause the area surrounding
the image to darken.
9
Use with DIS
Concurrent use of the electronic image stabilizer
together with the
optical image stabilizer enhances
the performance of image stabilization.
[Setting Values: On, ROff]
Flicker Correction
For setting whether to adjust image flicker that
occurs under a fluorescent light.
[Setting Values: On, ROff]
Memo :
0
During full auto, the setting values become “---”
and cannot be changed.
102
Overlay Settings Menu n
Menu Display and Detailed Settings