INSTRUCTIONS
Table Of Contents
- Introduction
- Preparations
- Shooting
- Basic Shooting Procedures
- Selecting System Definition, File Format and Video Format
- Zoom Operation
- Focus Operation
- Adjusting the Focusing by Face Detection
- Adjusting the Brightness
- Adjusting the Iris
- Setting the Gain
- Setting the Electronic Shutter
- Setting the ND Filter
- Adjusting the White Balance
- Adjusting the Camera Image
- Using the Image Stabilizer
- Audio Recording
- Monitoring Audio Sound During Recording Using a Headphone
- Time Code and User’s Bit
- Setting Time Code Generator
- Setting the User’s Bit
- Setting Zebra Pattern
- Viewing Recorded Videos Immediately (Clip Review)
- Using the Histogram
- Recording Simultaneously at Two Different Definitions
- Series Rec
- Dual Rec
- Backup Rec
- Special Recording
- Splitting the Clips Freely (Clip Cutter Trig)
- Playback
- Menu Display and Detailed Settings
- Display/Status Screen
- Camera Features
- Connecting External Devices
- Connecting to the Network
- Functions of Network Connection
- Preparing Network Connection
- Importing Metadata
- Uploading a Recorded Video Clip
- FTP Resume Feature
- Connecting from a Web Browser
- Editing Metadata
- Uploading a Recording Clip via a Web Browser
- View Remote Feature
- Camera Control Function
- Configuring Settings via a Browser
- Managing the Network Connection Settings File
- Performing Live Streaming
- Logging in to Facebook
- Live Streaming on Facebook Live
- Logging in to YouTube
- Live Streaming on YouTube Live
- Broadcast Overlay
- Others
Connecting External
Monitor
0
To output live or playback video images and
audio sound to an external monitor, select the
output signals from the camera recorder, and
connect
using an
appropriate cable according to
the monitor to be used.
0
Choose the most suitable terminal according to
the monitor in use.
0
[SDI OUT] terminal n m:
Outputs either the 3G-SDI/HD-SDI signal or SD-
SDI signal.
0
[AV] terminal:
Outputs composite video and audio signals.
0
[HDMI] terminal:
Outputs HDMI signals.
Memo :
0
If the [
SDI OUT
] terminal
n m or [HDMI]
terminal is connected, configure the settings in
the [A/V Set] menu according to the monitor to
be connected.
(A P116 [ HDMI/SDI Out n m ] )
(A
P117 [ HDMI Out M ] )
0
If you are connecting with an output signal at
4K(2160p), use an 4K compatible HDMI cable.
.
n
m
SDI IN
HDMI
AV input
Audio (Lch)
Audio (Rch)
Video
GND
*
Select the output signal in [A/V Set] B
[HDMI/SDI Out]
. n m
(A P116 [ HDMI/SDI Out n m ] )
*
Select the output signal in [A/V Set] B [HDMI
Out]. M
(A P117 [ HDMI Out M ] )
*
When [Record Format] B [System] is set to
“SD”, only SD-SDI signals are output. n m
(A P123 [ System ] )
* To display the menu screen or display screen on
an external monitor, set [A/V Set] B [Video Set]
B [Display On TV] to “On”.
(A P116 [ Display On TV ] )
152
Connecting External Monitor
Connecting External Devices