INSTRUCTIONS
Table Of Contents
- Introduction
- Preparations
- Shooting
- Basic Shooting Procedures
- Selecting System Definition, File Format and Video Format
- Zoom Operation
- Focus Operation
- Adjusting the Focusing by Face Detection
- Adjusting the Brightness
- Adjusting the Iris
- Setting the Gain
- Setting the Electronic Shutter
- Setting the ND Filter
- Adjusting the White Balance
- Adjusting the Camera Image
- Using the Image Stabilizer
- Audio Recording
- Monitoring Audio Sound During Recording Using a Headphone
- Time Code and User’s Bit
- Setting Time Code Generator
- Setting the User’s Bit
- Setting Zebra Pattern
- Viewing Recorded Videos Immediately (Clip Review)
- Using the Histogram
- Recording Simultaneously at Two Different Definitions
- Series Rec
- Dual Rec
- Backup Rec
- Special Recording
- Splitting the Clips Freely (Clip Cutter Trig)
- Playback
- Menu Display and Detailed Settings
- Display/Status Screen
- Camera Features
- Connecting External Devices
- Connecting to the Network
- Functions of Network Connection
- Preparing Network Connection
- Importing Metadata
- Uploading a Recorded Video Clip
- FTP Resume Feature
- Connecting from a Web Browser
- Editing Metadata
- Uploading a Recording Clip via a Web Browser
- View Remote Feature
- Camera Control Function
- Configuring Settings via a Browser
- Managing the Network Connection Settings File
- Performing Live Streaming
- Logging in to Facebook
- Live Streaming on Facebook Live
- Logging in to YouTube
- Live Streaming on YouTube Live
- Broadcast Overlay
- Others
Assignment of Functions
to User Buttons
You can assign functions to the following buttons
and use them as user buttons.
By assigning functions
to the buttons, the usability
of the camera recorder can be enhanced.
Perform settings in the menu items corresponding
to each button.
Button Menu Item
[F.ASSIST/1] Button [USER1]
[TC/2] Button [USER2]
[LOLUX/3] Button [USER3]
[C.REVIEW/4] Button [USER4]
[ZEBRA/5] Button [USER5]
[OIS/6] Button [USER6]
[REC/7] Button [USER7]
[EXPANDED FOCUS/8] Button [USER8]
[AWB/9] Button [USER9]
LCD Cross-Shaped Button (J)
[LCD KEY▲]
LCD Cross-Shaped Button (K)
[LCD KEY▼]
LCD Cross-Shaped Button (H)
[LCD KEY◀]
LCD Cross-Shaped Button (I)
[LCD KEY▶]
.
1
Assign functions to the buttons from the
menu.
Specify each item in [Camera Function] B [User
Switch
Set] B [USER1]-[USER9], [LCD KEY▲],
[LCD KEY▶], [LCD KEY▼], [LCD KEY◀].
(A P105 [User Switch Set Item] )
Memo :
0
Operations of the user buttons are interlocked
with the menu settings.
0
When the menu screen is displayed, these
buttons function as
the menu operation buttons.
(A P97 [Basic Operations in Menu Screen] )
Tally Lamp
This is the indicator lamp for recording and
warning.
The operation changes according to the menu
settings.
The lamp blinks when the battery or remaining
space on the SD card is low. (Camera mode only)
*
Specify the setting in [System] B [Tally Lamp
].
(A
P122 [ Tally Lamp ] )
.
Tally Lamp
(Front)
Handle Tally
Lamp
Menu Setting Tally Lamp Off On
Functional
information
Warning -
J
Caution -
o
Recording status Recording -
R
Special recording * -
R
R
:
Lights up
J
:
Blinks four times in 1 second
o
:
Blinks once in 1 second
*
Paused state during special recording ([Clip
Continuous]
).
(A P83 [Clip Continuous Rec] )
Memo :
0
Blinking takes priority over lighting up.
42
Assignment of Functions to User Buttons
Preparations