INSTRUCTIONS
Table Of Contents
- Introduction
- Preparations
- Shooting
- Basic Shooting Procedures
- Selecting System Definition, File Format and Video Format
- Zoom Operation
- Focus Operation
- Adjusting the Focusing by Face Detection
- Adjusting the Brightness
- Adjusting the Iris
- Setting the Gain
- Setting the Electronic Shutter
- Setting the ND Filter
- Adjusting the White Balance
- Adjusting the Camera Image
- Using the Image Stabilizer
- Audio Recording
- Monitoring Audio Sound During Recording Using a Headphone
- Time Code and User’s Bit
- Setting Time Code Generator
- Setting the User’s Bit
- Setting Zebra Pattern
- Viewing Recorded Videos Immediately (Clip Review)
- Using the Histogram
- Recording Simultaneously at Two Different Definitions
- Series Rec
- Dual Rec
- Backup Rec
- Special Recording
- Splitting the Clips Freely (Clip Cutter Trig)
- Playback
- Menu Display and Detailed Settings
- Display/Status Screen
- Camera Features
- Connecting External Devices
- Connecting to the Network
- Functions of Network Connection
- Preparing Network Connection
- Importing Metadata
- Uploading a Recorded Video Clip
- FTP Resume Feature
- Connecting from a Web Browser
- Editing Metadata
- Uploading a Recording Clip via a Web Browser
- View Remote Feature
- Camera Control Function
- Configuring Settings via a Browser
- Managing the Network Connection Settings File
- Performing Live Streaming
- Logging in to Facebook
- Live Streaming on Facebook Live
- Logging in to YouTube
- Live Streaming on YouTube Live
- Broadcast Overlay
- Others
1
Set [TC/UB] B [
UB Mode]
to “Preset”, and
press the Set button (R).
(A P
111 [ UB Mode ] )
.
1
TC/UB
UB Mode
Preset
Time
Preset
Date
Memo :
0
When [TC/UB] B [TC Generator] is set to
“Regen”, the parameter
is displayed as “Regen”
and cannot be selected.
(A P111 [ TC Generator ] )
2
Select [TC/UB] B “Preset” and press the Set
button (R).
The [Preset] setting screen appears.
3
Use the cross-shaped button (HI) to place
the cursor at the item to set, then use the
cross-shaped button (JK
) to change the
values.
Numbers between 0 and 9 or alphabets
between A and
F can be specified for the user’s
bit.
.
TC/UB
Cursor
Memo :
0
Press the [C.REVIEW/4] button to reset each digit
to “0”. The cursor moves to the left.
4
Check the values and press the Set button
(R).
0
The
user’s bit
is set and the screen returns to
[TC/UB].
0
To cancel the setting, press the [CANCEL/
STOP] button.
5
Press the [MENU/THUMB] button.
Returns to the normal screen.
Setting Zebra Pattern
When the luminance level range for displaying
zebra patterns is specified, diagonal lines (zebra
pattern) are displayed at areas with the specified
luminance levels during shooting.
.
1
Set the zebra display pattern.
Select the display pattern in [LCD/VF] B
[Shooting Assist] B [Zebra].
2
Specify the brightness (luminance) level
range for displaying zebra pattern.
Specify the upper and lower limits of the
luminance level in
[LCD/VF]
B [Shooting
Assist] B [Zebra] B [Top] and [Bottom].
Item Settings Options
Top Upper luminance
limit for displaying
[Zebra]
5% - 100%, Over
(in
5 %
increments)
Bottom Lower luminance
limit for displaying
[Zebra]
0% - 100% (in 5 %
increments)
3
Display the zebra pattern.
Press the [ZEBRA/5] button to
display the zebra
pattern in the specified range.
.
During zebra pattern display, (zebra icon)
is displayed on the display screen in Camera
mode.
Memo :
0
“Zebra” is assigned to the [ZEBRA/5]
button in
factory default.
0
“Zebra” can also be assigned to other user
buttons.
(A P42 [Assignment of Functions to User
Buttons] )
76
Setting the User’s Bit
Shooting