INSTRUCTIONS(BASIC)

1
Open the SD card cover by sliding the cover
in the direction indicated by the arrow.
2
Insert an SD card with the notched corner
pointing up.
The status indicator of the card slot to which the
card was inserted lights up in red.
3
Close the SD card cover in the direction
indicated by the arrow.
Formatting (Initializing) SD Cards
When the following cards are inserted, [!FORMAT]
appears at the remaining media display area.
Format the card using the camera recorder menu.
0
Unformatted SD cards
0
SD cards formatted under different
specifications
Caution :
0
Be sure to format the SD card on this camera
recorder. SD
cards formatted on a PC and other
peripheral equipment cannot be used on this
camera recorder.
0
[!RESTORE] appears at the remaining media
display area when an SD card that requires
restoring is inserted.
1
Select [System] B [Media] B [Format
Media].
2
Select the slot of the SD card to be
formatted and press the Set button (R
).
.
2
Set
Format Media
Format Slot A
Format Slot B
3
The status of the selected SD card appears.
4
Select [Format] and press the Set button
(R).
.
4
Set
Cancel
Format
Format Media
5
Formatting starts.
.
Formatting...
6
Formatting is complete.
When formatting is complete, “Complete” appears
and the camera recorder returns to the [Format
Media] screen.
Memo :
0
During formatting, menu operation is
unavailable but you can start recording.
However, this is only available when a
recordable SD card is inserted in the other slot.
0
Formatting cannot
be performed in the following
cases.
0
Recording is in progress on the SD card to be
formatted.
0
SD card is not inserted.
0
Write-protect switch of the SD card is set (z
is displayed).
Caution :
0
If you format the SD card, all data recorded on
the card, including video data and setup files,
will be deleted.
Inserting an SD Card
19
Preparations