INSTRUCTIONS
Table Of Contents
- Introduction
- Preparations
- Shooting
- Basic Shooting Procedures
- Selecting System Definition, File Format and Video Format
- Zoom Operation
- Focus Operation
- Adjusting the Focusing by Face Detection
- Adjusting the Brightness
- Adjusting the Iris
- Setting the Gain
- Setting the Electronic Shutter
- Setting the ND Filter
- Adjusting the White Balance
- Adjusting the Camera Image
- Using the Image Stabilizer
- Audio Recording
- Monitoring Audio Sound During Recording Using a Headphone
- Time Code and User’s Bit
- Setting Time Code Generator
- Setting the User’s Bit
- Setting Zebra Pattern
- Viewing Recorded Videos Immediately (Clip Review)
- Using the Histogram
- Recording Simultaneously at Two Different Definitions
- Series Rec
- Dual Rec
- Backup Rec
- Special Recording
- Splitting the Clips Freely (Clip Cutter Trig)
- Playback
- Menu Display and Detailed Settings
- Display/Status Screen
- Camera Features
- Connecting External Devices
- Connecting to the Network
- Functions of Network Connection
- Preparing Network Connection
- Importing Metadata
- Uploading a Recorded Video Clip
- FTP Resume Feature
- Connecting from a Web Browser
- Editing Metadata
- Uploading a Recording Clip via a Web Browser
- View Remote Feature
- Camera Control Function
- Configuring Settings via a Browser
- Managing the Network Connection Settings File
- Performing Live Streaming
- Broadcast Overlay
- Others
9
Bit Rate
For setting the encode bitrate of the video image
during live distribution.
The selectable options vary according to the
settings in
[Live Streaming Set] B [Resolution] and
[Frame Rate].
W Frame
Rate
Resolution
Frame Rate/Bit Rate
Setting Value
(R: default value)
60i,
60p,
30p
1920×1080 60i/12.0M, R60i/8.0M,
60i/5.0M, 60i/3.0M
1280×720 60p/12.0M, 60p/8.0M,
60p/5.0M, 60p/3.0M,
30p/8.0M, R30p/5.0M,
30p/3.0M,30p/1.5M
720×480 60i/8.0M, 60i/5.0M,
R60i/3.0M, 60i/1.5M,
60i/0.8M, 60i/0.3M
640×360 60p/3.0M, 60p/1.5M,
30p/3.0M, R30p/1.5M,
30p/0.8M, 30p/0.3M
50i,
50p,
25p
1920×1080 50i/12.0M, R50i/8.0M,
50i/5.0M, 50i/3.0M
1280×720 50p/12.0M, 50p/8.0M,
50p/5.0M, 50p/3.0M,
25p/8.0M, R25p/5.0M,
25p/3.0M, 25p/1.5M
720×576 50i/8.0M, 50i/5.0M,
R50i/3.0M, 50i/1.5M,
50i/0.8M, 50i/0.3M
640×360 50p/3.0M, 50p/1.5M,
25p/3.0M, R25p/1.5M,
25p/0.8M, 25p/0.3M
Memo :
0
The setting cannot be changed during live
streaming (Live Streaming set to “On
”).
0
An encoding
bit rate exceeding 8.0 Mbps cannot
be selected when [Type] is set to “RTSP/RTP”.
0
An encoding
bit rate exceeding 5.0 Mbps cannot
be selected when [Type] is set to “ZIXI” and
[Latency] is set to other than “Low”, or when
[Type] is set to “RTMP”.
0
An
encoding
bit rate exceeding 3.0 Mbps cannot
be selected when [Type] is set to “ZIXI” and
[Latency] is set to “Low”.
0
Depending
on
the type of network adapter used
and the connection, the images and audio
sound during live streaming can be choppy.
Connection Setup
For configuring the network connection settings.
A [Wizard] screen will appear according to the
adapter connected to the [HOST
] terminal. Follow
the instructions to perform the setting.
You can Load, Store, and Delete the settings
specified on the [Wizard] screen.
9
Wizard
A [Wizard] appears according to the adapter
connected to the [HOST] terminal.
Follow the instructions.
9
Load
Loads the settings on the
[
Wizard] screen.
(A P175 [Reading the Connection Settings
File] )
9
Store
Saves the settings on the
[Wizard] screen.
(
A P174 [Saving the Connection Settings File] )
9
Delete
Deletes the saved settings.
(A P
175 [Deleting Connection Settings] )
124
System Menu
Menu Display and Detailed Settings