INSTRUCTIONS
Table Of Contents
- Introduction
- Preparations
- Shooting
- Basic Shooting Procedures
- Selecting System Definition, File Format and Video Format
- Zoom Operation
- Focus Operation
- Adjusting the Focusing by Face Detection
- Adjusting the Brightness
- Adjusting the Iris
- Setting the Gain
- Setting the Electronic Shutter
- Setting the ND Filter
- Adjusting the White Balance
- Adjusting the Camera Image
- Using the Image Stabilizer
- Audio Recording
- Monitoring Audio Sound During Recording Using a Headphone
- Time Code and User’s Bit
- Setting Time Code Generator
- Setting the User’s Bit
- Setting Zebra Pattern
- Viewing Recorded Videos Immediately (Clip Review)
- Using the Histogram
- Recording Simultaneously at Two Different Definitions
- Series Rec
- Dual Rec
- Backup Rec
- Special Recording
- Splitting the Clips Freely (Clip Cutter Trig)
- Playback
- Menu Display and Detailed Settings
- Display/Status Screen
- Camera Features
- Connecting External Devices
- Connecting to the Network
- Functions of Network Connection
- Preparing Network Connection
- Importing Metadata
- Uploading a Recorded Video Clip
- FTP Resume Feature
- Connecting from a Web Browser
- Editing Metadata
- Uploading a Recording Clip via a Web Browser
- View Remote Feature
- Camera Control Function
- Configuring Settings via a Browser
- Managing the Network Connection Settings File
- Performing Live Streaming
- Broadcast Overlay
- Others
Operation Lock Feature
You can use this feature to prevent erroneous
camera operation.
.
1
While in the Camera mode (when the
display screen appears), press and hold
the [CANCEL/STOP]
button for 5 seconds
or longer.
0
The operation
lock turns on, and an operation
lock icon (r) appears on the display
screen.
.
1/100
F1. 6
18
dB
AE+6
ND 1 /1 6
12 :34 :56
Jan 24,2015
00:00: 00.00
4030 20 10 0
5 . 6 f t
P 15000K
0
Press the [CANCEL/STOP] button again for
5 seconds or longer to turn off the operation
lock.
Memo :
0
The operation lock feature is only valid in the
Camera mode.
(A P18 [Operation Modes] )
0
The power turns off and the operation lock is
disengaged.
0
The following remote operations are possible
even when the operation lock feature is turned
on (“On”).
0
Remote operation from the wired remote
control connected
to the [REMOTE] terminal.
0
Remote operation of the camera through
access via a browser on devices such as a
smartphone, tablet terminal, or PC.
Operation lock does not apply to the following
buttons and switches.
0
[POWER ON/OFF]
switch
0
[AUDIO INPUT INPUT1
]/[AUDIO INPUT
INPUT2] Audio input signal selection switch
O
0
[CH-1
]
/[CH-2] Audio input signal selection
switch O
0
[AUDIO SELECT CH-1 AUTO/MANU]/[AUDIO
SELECT CH-2 AUTO/MANU] Audio recording
mode switch
O
0
Focus ring
0
Zoom
lever
at the grip/Zoom lever at the handle
O/Zoom ring at the lens section
0
[ZOOM L/M/H] Zoom Speed Switch O
0
Iris Dial
0
[REC/HOLD] Record Trigger Button/Lock
Switch O
0
[
REC] button (on the grip)
0
Visibility Adjustment Lever
0
User button that has been assigned with the
[Rec] function.
Operation Lock Feature
45
Preparations