INSTRUCTIONS
Table Of Contents
- Introduction
- Preparations
- Shooting
- Basic Shooting Procedures
- Selecting System Definition, File Format and Video Format
- Zoom Operation
- Focus Operation
- Adjusting the Focusing by Face Detection
- Adjusting the Brightness
- Adjusting the Iris
- Setting the Gain
- Setting the Electronic Shutter
- Setting the ND Filter
- Adjusting the White Balance
- Adjusting the Camera Image
- Using the Image Stabilizer
- Audio Recording
- Monitoring Audio Sound During Recording Using a Headphone
- Time Code and User’s Bit
- Setting Time Code Generator
- Setting the User’s Bit
- Setting Zebra Pattern
- Viewing Recorded Videos Immediately (Clip Review)
- Using the Histogram
- Recording Simultaneously at Two Different Definitions
- Series Rec
- Dual Rec
- Backup Rec
- Special Recording
- Splitting the Clips Freely (Clip Cutter Trig)
- Playback
- Menu Display and Detailed Settings
- Display/Status Screen
- Camera Features
- Connecting External Devices
- Connecting to the Network
- Functions of Network Connection
- Preparing Network Connection
- Importing Metadata
- Uploading a Recorded Video Clip
- FTP Resume Feature
- Connecting from a Web Browser
- Editing Metadata
- Uploading a Recording Clip via a Web Browser
- View Remote Feature
- Camera Control Function
- Configuring Settings via a Browser
- Managing the Network Connection Settings File
- Performing Live Streaming
- Broadcast Overlay
- Others
Adjusting the Iris
Adjust the
aperture of the lens iris according to the
brightness of the subject.
.
Iris Dial
Auto Iris (Automatic Adjustment) Mode
1
Press and hold the [FULL AUTO] button to
set Full Auto mode to off.
2
Press the [IRIS A/M] button to set to the
Auto Iris mode.
The iris is automatically adjusted according to
the brightness of the object.
The lens aperture value (F-number) is not
displayed in the Auto Iris mode.
Memo :
0
Pressing and holding the [FULL AUTO] button
to enter the Full Auto mode also activates the
Auto Iris mode. In this case, the Gain, Shutter
and White Balance also enter into Auto mode
forcibly.
The switching
operation of the [IRIS A/M] button
is disabled in the Full Auto mode.
0
The iris open/close limit can be set in
[Main
Menu]
B [Camera Function] B [Auto Iris Limit
(OPEN)]/[Auto Iris Limit (CLOSE)] during Auto
Iris.
(A P99
[ Auto Iris Limit (OPEN) ] )
(
A P99 [ Auto Iris Limit (CLOSE) ] )
0
To set the target level (brighter/darker) of the
auto iris, you can press and hold the [AE
LEVEL] button on the side of the camera
recorder and then change the level using the J /
K volume button.
0
The convergence speed of the auto iris can be
set in the menu.
(A P99 [ AE Speed ] )
Manual Iris (Manual Adjustment) Mode
The aperture value (F-number) of the lens can be
set manually.
1
Press and hold the [FULL AUTO] button to
set Full Auto mode to off.
2
Press the [IRIS A/M] button to set to the
Manual Iris mode.
The lens aperture value (F-number) is
displayed.
.
1/100
F1. 6
18
dB
AE+6
ND 1 / 16
12 :34 : 56
Jan 24 ,2015
00:00:00.00
5 . 6 f t
4030 20 10 0
P 150 00 K
3
Turn the iris dial to adjust the iris manually.
0
Iris adjustment can be assigned to the zoom
ring.
Set
[
Main Menu] B [Camera Function] B
[Zoom Ring] to “Iris”.
(A P
99 [ Zoom Ring ] )
The open F-number of the aperture varies
according to the zoom position.
Wide [W] end :
F1.2
Tele [T] end : F3.5
F-number Description
Decrease The subject appears brighter.
The focused range becomes
sharper, while the background is
blurred to produce a soft image.
Increase The subject appears darker.
Background of image becomes
focused as well.
Memo :
0
If [One Push Iris
] is assigned to the user button,
pressing the assigned user button while in the
Manual Iris mode activates the One-push Auto
Iris mode, and holding down the button activates
the Push Auto Iris mode.
0
In addition to the [Iris]
function, the iris dial can
also be assigned with the [Shutter] or [AE
Level] function.
(A P
99 [ Iris Dial ] )
56
Adjusting the Iris
Shooting