User Manual
Table Of Contents
- Introduction
- Preparations
- Shooting
- Basic Shooting Procedures
- Selecting System Definition, File Format and Video Format
- Zoom Operation
- Focus Operation
- Adjusting the Focusing by Face Detection
- Adjusting the Brightness
- Adjusting the Iris
- Setting the Gain
- Setting the Electronic Shutter
- Setting the ND Filter
- Adjusting the White Balance
- Adjusting the Camera Image
- Using the Image Stabilizer
- Audio Recording
- Monitoring Audio Sound During Recording Using a Headphone
- Time Code and User’s Bit
- Setting Time Code Generator
- Setting the User’s Bit
- Synchronizing Time Code on Another Camera
- Setting Zebra Pattern
- Setting Spot Meter
- Acquiring Positioning Information by GPS
- Viewing Recorded Videos Immediately (Clip Review)
- Splitting the Clips Freely (Clip Cutter Trig)
- Recording Simultaneously at Two Different Definitions
- Series Rec
- Dual Rec
- Backup Rec
- Special Recording
- Playback
- Menu Display and Detailed Settings
- Display/Status Screen
- Camera Features
- Connecting External Devices
- Connecting to the Network
- Functions of Network Connection
- Preparing Network Connection
- Importing Metadata
- Uploading a Recorded Video Clip
- FTP Resume Feature
- Connecting from a Web Browser
- Editing Metadata
- Uploading a Recording Clip via a Web Browser
- View Remote Feature
- Camera Control Function
- Changing the Settings via a Web Browser
- Managing the Network Connection Settings File
- Performing Live Streaming
- Others
A/V Set Menu
Menu screen for video output and audio.
Video Set...
For specifying video output-related settings.
(A P112
[Video Set Item] )
Audio Set...
For specifying audio-related settings.
(A P113
[Audio Set Item] )
Video Set Item
Display On TV
For
setting whether to display the display and menu
characters on the external monitor.
[Setting Values: On, ROff]
HDMI/SDI Out
For setting the terminal to output the video.
[Setting Values: HDMI+SDI, SDI, HDMI, ROff]
Memo :
0
When the [
Network] setting is set to “On(SDI
Off)”, “HDMI+SDI” and “SDI” are not selectable.
And when “On(HDMI Off)” is set, “HDMI+SDI”
and “HDMI” are not selectable.
9
Resolution
For
selecting the resolution of video output from the
[HDMI]/[SDI] terminal according to the monitor to
be connected.
[Setting Values: 576i, 576p, 480i, 480p, 720p,
R1080i, 1080p]
Memo :
0
When
[Main Menu] B [A/V Set] B [Video Set] B
[HDMI/SDI Out] is set to “HDMI+SDI” or “SDI”,
“1080p” cannot be selected.
0
When
[Main Menu] B [A/V Set] B [Video Set] B
[HDMI/SDI Out] is set to “HDMI+SDI” or “SDI”,
changing the resolution will cause the camera
recorder to restart. “Please Wait...” will be
displayed.
0
The selectable options vary according to the
setting in [System
]/[WResolution]/[WFrame &
Bit Rate] of [System] B [Record Set] B [Record
Format].
0
Cross conversion output is not possible.
9
HDMI Color
0
For setting the color format of HDMI signals.
0
This item is selectable only when
[HDMI/SDI
Out] is set to “HDMI” or “HDMI+SDI”.
[Setting Values: RGB, RAuto]
9
HDMI Enhance
0
For setting the color range of HDMI signals.
When connecting to a PC monitor, set this to
“
On”.
0
This item is selectable only when
[HDMI/SDI
Out] is set to “HDMI” or “HDMI+SDI”.
[Setting Values: On, ROff]
9
Rec Trigger
For
setting whether to superimpose trigger signals
in tandem with the [HDMI] terminal, [HD/SD SDI]
terminal and the [REC] button on the camera body.
When a compatible device is connected,
recording/stop control signals are output in tandem
with the operation of the [REC] button.
The record trigger output status to the connected
device is indicated by REC B/STBYB on the
display screen.
0
HDMI+SDI:
Superimposes
the trigger signals in tandem with
the [HDMI] terminal, [HD/SD SDI] terminal and
the [REC] button on the camera body and
outputs the recording/stop control signals to the
compatible device.
0
SDI:
Superimposes
the trigger signals in tandem with
the [SDI] terminal as well as the [REC] button on
the camera body and outputs the recording/stop
control signals to the compatible device.
0
HDMI:
Superimposes
the trigger signals in tandem with
the [HDMI] terminal as well as the [REC] button
on the camera body and outputs the recording/
stop control signals to the compatible device.
0
Off:
Does not superimpose the trigger signals.
[Setting Values: ROff, HDMI, SDI, HDMI+SDI]
Memo :
0
Even if REC B/STBYB is displayed on the
display screen, the compatible device may not
necessarily be recording.
0
When
[Main Menu] B [A/V Set] B [Video Set] B
[HDMI/SDI Out] is set to “Off”, [Rec Trigger] is
fixed at “Off” and cannot be selected.
0
When [Main Menu
] B [System] B [Record Set]
B [Rec Mode] is set to “Interval Rec”, “Frame
Rec” or “Variable Frame”, [Rec Trigger] is fixed
at “Off” and cannot be selected.
0
Set to “Off” if connecting to a device that does
not support record trigger.
112
Menu Display and Detailed Settings