User Manual

9
Live Streaming
Starts live distribution when “On” is selected.
[Setting Values: On, ROff]
Memo :
0
“On” cannot be selected if network connection
is not established.
0
“On” cannot be selected when FTP is running.
0
Live
streaming switches to “Off” when the power
is turned off.
9
Server
For selecting the server for live streaming.
[Setting Values: RServer1, Server2, Server3,
Server4]
Memo :
0
The setting cannot be changed during live
streaming (Live Streaming set to
“On”).
9
Streaming Server
For setting the server for live streaming.
Memo :
0
The setting cannot be changed during live
streaming (Live Streaming set to
“On”).
9
Server1/Server2/Server3/Server4
o
Alias
For setting a name to distinguish the settings of
this camera recorder.
The
name set in this item will be displayed in the
[Server] options.
* The default value is “Server1/Server2/Server3/
Server4”.
* You can enter up to 31 characters and ASCII
characters.
o
Type
For setting the system to transfer videos for
distribution.
[Setting Values: RMPEG2-TS/UDP, MPEG2-
TS/TCP, MPEG2-TS/RTP, RTSP/RTP, ZIXI,
RTMP]
Memo :
0
Use reception devices that are compatible with
the respective transfer systems.
0
To use the
“ZIXI” setting, a dedicated server is
needed separately.
0
The following items that can be set vary
depending on the setting of this item.
o
Destination Address
For setting details such as the host name and
the
IP address of the live distribution destination.
* Enter not more than 127 characters using single-
byte alphanumeric characters (a to z, 0 to 9),
single-byte hyphen [-], or dot [.].
o
Destination URL
For entering the URL of the live distribution
destination beginning with “rtmp://”.
There is no default value (blank).
*
You can enter up to 191 characters and ASCII
characters.
o
Destination Port
Enter the network port number of the live
distribution destination using an integer
between 1 and 65535.
When [Type] is set to
“MPEG2-TS/UDP”,
“MPEG2-TS/TCP” or “MPEG2-TS/RTP”, the
default value is “6504”. If “ZIXI” is set, the default
value is “2088”.
Memo :
0
When [Type] is set to “MPEG2-TS/RTP”, only
even numbers from 2 to 65530 can be specified
for the port number.
0
When [Type
] is set to “MPEG2-TS/RTP” and
[SMPTE 2022-1 FEC] is set to “On”, N+2 and N
+4 port numbers are also used in addition to the
specified port number (N).
o
Stream ID
For setting the registered stream ID of the live
distribution destination.
The
default value varies with the product model.
* Enter not more than 63 characters.
o
Stream Key
Enter the stream key specified at the live
transmission destination.
There is no default value (blank).
*
Enter not more than 63 characters.
o
Password
For setting the [Stream ID] password.
There is no default value (blank).
* Enter
not more than 127 characters. When [Type]
is set to “RTSP/RTP”, enter not more than 31
characters.
o
Latency
For setting the latency mode.
[Setting Values: High, Medium, RLow,
Minimun(ZIXI Off)]
123
Menu Display and Detailed Settings