User Manual
Table Of Contents
- Introduction
- Preparations
- Shooting
- Basic Shooting Procedures
- Selecting System Definition, File Format and Video Format
- Zoom Operation
- Focus Operation
- Adjusting the Focusing by Face Detection
- Adjusting the Brightness
- Adjusting the Iris
- Setting the Gain
- Setting the Electronic Shutter
- Setting the ND Filter
- Adjusting the White Balance
- Adjusting the Camera Image
- Using the Image Stabilizer
- Audio Recording
- Monitoring Audio Sound During Recording Using a Headphone
- Time Code and User’s Bit
- Setting Time Code Generator
- Setting the User’s Bit
- Synchronizing Time Code on Another Camera
- Setting Zebra Pattern
- Setting Spot Meter
- Acquiring Positioning Information by GPS
- Viewing Recorded Videos Immediately (Clip Review)
- Splitting the Clips Freely (Clip Cutter Trig)
- Recording Simultaneously at Two Different Definitions
- Series Rec
- Dual Rec
- Backup Rec
- Special Recording
- Playback
- Menu Display and Detailed Settings
- Display/Status Screen
- Camera Features
- Connecting External Devices
- Connecting to the Network
- Functions of Network Connection
- Preparing Network Connection
- Importing Metadata
- Uploading a Recorded Video Clip
- FTP Resume Feature
- Connecting from a Web Browser
- Editing Metadata
- Uploading a Recording Clip via a Web Browser
- View Remote Feature
- Camera Control Function
- Changing the Settings via a Web Browser
- Managing the Network Connection Settings File
- Performing Live Streaming
- Others
Memo :
0
If image stabilizer is set to
“OFF” when the
Display 0 screen is displayed, h appears for 3
seconds.
0
Displayed in the Display 0 screen only when
there is a change.
L
White Balance Mode
Displays the current white balance mode.
(*****K indicates color temperature)
A<*****K> : When the white balance is set to
Auto A.
B<*****K> : When the white balance is set to
Auto B.
P<*****K> : When the white balance is set to
Preset.
a
<FAW> : During Full Auto White Balance
mode.
Z
<FAW> : When [AE LOCK] is set to “On”
during Full Auto White Balance
mode.
Memo :
0
Displayed in the Display 0 screen only when
there is a change.
M
Shutter
0
The
current shutter speed is displayed when
the shutter is set to “On”.
(A P
98 [ Shutter ] )
0
a
is displayed when the [FULL AUTO] switch
is set to “ON” to enable Full Auto shooting
mode, or when the [SHUTTER] button is
pressed to enable automatic shutter mode.
Memo :
0
The variable range of the shutter speed varies
according to the video format settings.
(A P56
[Setting the Electronic Shutter] )
0
Displayed in the Display 0 screen only when
there is a change.
0
If
the shutter speed is not displayed, the shutter
is OFF.
N
Iris F-Number
Displays F-number of the lens iris.
O
Gain
0
Displays the gain value.
0
a is displayed in AGC mode during Manual
shooting.
0
Z
is displayed when AE LOCK is set to “ON”.
0
“LUX30” or “LUX36” is displayed when in the
low-light shooting mode.
Memo :
0
Displayed in the Display 0 screen only when
there is a change.
P
AE Level
0
Appears when the AE function is activated,
and
[Main Menu] B [Camera Function] B
[AE Level] is set to a value other than
“Normal”.
(A P98 [ AE Level ] )
0
When operated while manual operation is
disabled, “AE” blinks for about 5 seconds.
0
When face detection is enabled and
[Face
Detect] is set to “AF&AE”, q appears on the
left side of “AE”.
(A P52 [Adjusting the Focusing by Face
Detection] )
Q
ND Filter Position
Displays the current ND filter position.
Memo :
0
This item is not displayed when [Main Menu] B
[LCD/VF] B [Display Settings] B [ND Filter] is
set to “Off”.
(A P110
[ ND Filter ] )
0
Displayed in the Display 0 screen only when
there is a change.
R
Focus Display
0
Displays the approximate distance to the
subject in focus during manual focus.
0
e is displayed during Auto Focus.
0
When
face detection is enabled, q appears
on the left side of e.
(A P52 [Adjusting the Focusing by Face
Detection] )
(A P101 [ Face Detect ] )
0
If [Main Menu] B [Camera Function] B [AF
Assist] is set to “Area”, the
icon appears
on the left side of e.
(A P
99 [ AF Assist ] )
Memo :
0
You can specify the display method (Feet/
Meter) in
[Main Menu] B [LCD/VF] B [Display
Settings] B [Focus].
This item will not be displayed when “Off” is
selected.
(A P
110 [ Focus ] )
0
Displayed in the Display 0 screen only when
there is a change.
S
Zebra pattern
During zebra pattern display, (zebra icon)
is displayed on the display screen in Camera
mode.
(A P71 [Setting Zebra Pattern] )
133
Display/Status Screen