User Manual
Table Of Contents
- Introduction
- Preparations
- Shooting
- Basic Shooting Procedures
- Selecting System Definition, File Format and Video Format
- Zoom Operation
- Focus Operation
- Adjusting the Focusing by Face Detection
- Adjusting the Brightness
- Adjusting the Iris
- Setting the Gain
- Setting the Electronic Shutter
- Setting the ND Filter
- Adjusting the White Balance
- Adjusting the Camera Image
- Using the Image Stabilizer
- Audio Recording
- Monitoring Audio Sound During Recording Using a Headphone
- Time Code and User’s Bit
- Setting Time Code Generator
- Setting the User’s Bit
- Synchronizing Time Code on Another Camera
- Setting Zebra Pattern
- Setting Spot Meter
- Acquiring Positioning Information by GPS
- Viewing Recorded Videos Immediately (Clip Review)
- Splitting the Clips Freely (Clip Cutter Trig)
- Recording Simultaneously at Two Different Definitions
- Series Rec
- Dual Rec
- Backup Rec
- Special Recording
- Playback
- Menu Display and Detailed Settings
- Display/Status Screen
- Camera Features
- Connecting External Devices
- Connecting to the Network
- Functions of Network Connection
- Preparing Network Connection
- Importing Metadata
- Uploading a Recorded Video Clip
- FTP Resume Feature
- Connecting from a Web Browser
- Editing Metadata
- Uploading a Recording Clip via a Web Browser
- View Remote Feature
- Camera Control Function
- Changing the Settings via a Web Browser
- Managing the Network Connection Settings File
- Performing Live Streaming
- Others
Reading the Connection Settings File
1
Select [Main Menu] B [System] B
[Network]
/[Settings] B [Connection Setup]
and press the Set button (R).
2
Select [Load] and
press the Set button (R).
.
2
3
Select the file to read using the cross-
shaped button (JK), and press the Set
button (R).
.
3
4
Select [Load] on the confirmation screen,
and press the Set button (R).
Loading starts, and “Loading...” appears
on the
screen.
.
4
5
Reading is complete.
After reading of the file is complete, “Complete
”
appears on the screen, and the menu screen
closes automatically.
Deleting Connection Settings
1
Select [Main Menu] B [
System] B
[Network]/[Settings] B [Connection Setup]
and press the Set button (R).
2
Select [Delete] and press the Set button
(R).
.
2
3
Select the file to delete using the cross-
shaped button (JK), and press the Set
button (R).
.
3
4
Select [Delete] on the confirmation screen,
and press the Set button (R).
Deletion starts, and “Deleting...”
appears on the
screen.
.
4
5
Deletion is complete.
After file deletion is complete, “Complete”
appears on the screen.
174
Connecting to the Network
a