User Manual
Table Of Contents
- Introduction
- Preparations
- Shooting
- Basic Shooting Procedures
- Selecting System Definition, File Format and Video Format
- Zoom Operation
- Focus Operation
- Adjusting the Focusing by Face Detection
- Adjusting the Brightness
- Adjusting the Iris
- Setting the Gain
- Setting the Electronic Shutter
- Setting the ND Filter
- Adjusting the White Balance
- Adjusting the Camera Image
- Using the Image Stabilizer
- Audio Recording
- Monitoring Audio Sound During Recording Using a Headphone
- Time Code and User’s Bit
- Setting Time Code Generator
- Setting the User’s Bit
- Synchronizing Time Code on Another Camera
- Setting Zebra Pattern
- Setting Spot Meter
- Acquiring Positioning Information by GPS
- Viewing Recorded Videos Immediately (Clip Review)
- Splitting the Clips Freely (Clip Cutter Trig)
- Recording Simultaneously at Two Different Definitions
- Series Rec
- Dual Rec
- Backup Rec
- Special Recording
- Playback
- Menu Display and Detailed Settings
- Display/Status Screen
- Camera Features
- Connecting External Devices
- Connecting to the Network
- Functions of Network Connection
- Preparing Network Connection
- Importing Metadata
- Uploading a Recorded Video Clip
- FTP Resume Feature
- Connecting from a Web Browser
- Editing Metadata
- Uploading a Recording Clip via a Web Browser
- View Remote Feature
- Camera Control Function
- Changing the Settings via a Web Browser
- Managing the Network Connection Settings File
- Performing Live Streaming
- Others
.
AUX
INPUT2
INPUT1
DEVICE
AV
A
BATT.RELEASE
POWER
/CHG
B
HDMI
REMOTE
DC
HD/SD
SDI
REC
HOST
W
T
REC
HOLD
IN
OUT
TC
L
M
N
O
d
R
S T
X
Za
b
c
Q
P
U
V
Y
W
R
[REC] Record Trigger Button
Starts/stops recording.
Memo :
0
This button is interlocked with the
[REC] button
I at the bottom of the lens and the [REC/
HOLD] button Z at the top of the handle.
S
[C.REVIEW/7
] Clip Review/User 7 Button
For checking the most recently captured
images.
(A P74 [Viewing Recorded Videos
Immediately (Clip Review)] )
You can also use it as a user button by assigning
a specific feature in the menu setting to this
button.
(A P38 [Assignment of Functions to User
Buttons] )
T
Zoom Lever at the Grip
To operate zoom servo with the zoom lever at
the grip, set the [ZOOM SERVO/MANUAL]
switch 0 to “SERVO”.
(A P48 [Using the Zoom Lever at the Grip] )
U
[TC] TC Input/Output Terminal
(A P66 [Time Code and User’s Bit] )
V
[IN/OUT] TC IN/OUT Selection Switch
(A P70 [Synchronizing Time Code on
Another Camera] )
W
Hood Release Button
(A P28 [Attaching/Detaching the Hood] )
X
External Microphone Cable Clamp
(A P27 [Attaching an External Microphone] )
Y
[
INPUT1/INPUT2] Audio Input Terminal 1, 2
(XLR 3-pin x 2)
(A P27 [Attaching an External Microphone] )
Z
[REC/HOLD] Record Trigger Button/Lock
Switch
Starts/stops recording.
Set the switch to [HOLD] to lock the [REC]
Trigger button.
Memo :
0
This button is interlocked with the [REC] button
R on the grip and the [REC] button I at the
bottom of the lens.
0
The [REC] button R on the grip and the [REC]
button I at the bottom of the lens will not be
locked.
a
Zoom lever at the Handle
(A P48 [Using the Zoom Lever at the
Handle] )
b
Shoulder Belt Mount (x2)
For mounting a shoulder belt (sold separately).
Caution :
0
Be sure to use a shoulder belt with the strength
to
withstand the weight of this camera recorder.
0
If the shoulder belt is not properly attached, the
camera recorder may fall and cause injuries.
Check the instruction manual provided with the
shoulder belt before using.
c
[POWER/CHG] Power/Charging Display Lamp
(A P
28 [Using a Battery Pack] )
d
[BATT. RELEASE] Battery Lock Release Button
(A P29 [Removing the Battery] )
21
Introduction