User Manual
Table Of Contents
- Introduction
- Preparations
- Shooting
- Basic Shooting Procedures
- Selecting System Definition, File Format and Video Format
- Zoom Operation
- Focus Operation
- Adjusting the Focusing by Face Detection
- Adjusting the Brightness
- Adjusting the Iris
- Setting the Gain
- Setting the Electronic Shutter
- Setting the ND Filter
- Adjusting the White Balance
- Adjusting the Camera Image
- Using the Image Stabilizer
- Audio Recording
- Monitoring Audio Sound During Recording Using a Headphone
- Time Code and User’s Bit
- Setting Time Code Generator
- Setting the User’s Bit
- Synchronizing Time Code on Another Camera
- Setting Zebra Pattern
- Setting Spot Meter
- Acquiring Positioning Information by GPS
- Viewing Recorded Videos Immediately (Clip Review)
- Splitting the Clips Freely (Clip Cutter Trig)
- Recording Simultaneously at Two Different Definitions
- Series Rec
- Dual Rec
- Backup Rec
- Special Recording
- Playback
- Menu Display and Detailed Settings
- Display/Status Screen
- Camera Features
- Connecting External Devices
- Connecting to the Network
- Functions of Network Connection
- Preparing Network Connection
- Importing Metadata
- Uploading a Recorded Video Clip
- FTP Resume Feature
- Connecting from a Web Browser
- Editing Metadata
- Uploading a Recording Clip via a Web Browser
- View Remote Feature
- Camera Control Function
- Changing the Settings via a Web Browser
- Managing the Network Connection Settings File
- Performing Live Streaming
- Others
Operation Lock Feature
You can use this feature to prevent erroneous
camera operation.
.
AE LEVEL
MENU/THUMB
CANCEL
MENU/THUMB
CANCEL
1
While in the Camera mode (when the
display screen appears), press and hold
the [CANCEL]
button for 5 seconds or
longer.
0
The operation lock turns on, and an
operation lock icon (r) appears on the
display screen.
.
P 13000K 1/100
F1. 6
0
dB
AE+6
ND 1 /64
00:00: 00.00
40 30 20 10
0
0
Press the
[CANCEL] button again for 5
seconds or longer to turn off the operation
lock.
Memo :
0
The operation lock feature is only valid in the
Camera mode.
(A P18
[Operation Modes] )
0
The power turns off and the operation lock is
disengaged.
0
The [CANCEL] button on the LCD monitor
section cannot be used to turn on/off (“On/Off”)
the operation lock feature.
0
The following remote operations are possible
even when the operation lock feature is turned
on (“On
”).
0
Remote operation from the wired remote
control
connected to the [REMOTE] terminal.
0
Remote operation of the camera through
access via a browser on devices such as a
smartphone, tablet terminal, or PC.
Operation lock does not apply to the following
buttons and switches.
0
[
POWER ON/OFF(CHG)] switch
0
[ND FILTER] switch
0
TC [IN/OUT]
selection switch
0
All switches inside the LCD monitor door
(however, the operation of the [CH1/CH2]
adjustment knob will be locked.)
0
Focus ring
0
Zoom
lever at the grip/Zoom lever at the handle/
Zoom ring at the lens section
0
[ZOOM SERVO/MANUAL] switch
0
[FIX/VAR/OFF
] zoom speed switch
0
Iris ring
0
[REC]
button (at the top of the handle, on the grip
and at the bottom of the lens)
Memo :
0
The operation lock will also not apply to the
[REC
] button at the bottom of the lens if [Camera
Function] B [User Switch Set] B [Front REC] is
set to “Rec”.
44
Preparations