User Manual
Table Of Contents
- Introduction
- Preparations
- Shooting
- Basic Shooting Procedures
- Selecting System Definition, File Format and Video Format
- Zoom Operation
- Focus Operation
- Adjusting the Focusing by Face Detection
- Adjusting the Brightness
- Adjusting the Iris
- Setting the Gain
- Setting the Electronic Shutter
- Setting the ND Filter
- Adjusting the White Balance
- Adjusting the Camera Image
- Using the Image Stabilizer
- Audio Recording
- Monitoring Audio Sound During Recording Using a Headphone
- Time Code and User’s Bit
- Setting Time Code Generator
- Setting the User’s Bit
- Synchronizing Time Code on Another Camera
- Setting Zebra Pattern
- Setting Spot Meter
- Acquiring Positioning Information by GPS
- Viewing Recorded Videos Immediately (Clip Review)
- Splitting the Clips Freely (Clip Cutter Trig)
- Recording Simultaneously at Two Different Definitions
- Series Rec
- Dual Rec
- Backup Rec
- Special Recording
- Playback
- Menu Display and Detailed Settings
- Display/Status Screen
- Camera Features
- Connecting External Devices
- Connecting to the Network
- Functions of Network Connection
- Preparing Network Connection
- Importing Metadata
- Uploading a Recorded Video Clip
- FTP Resume Feature
- Connecting from a Web Browser
- Editing Metadata
- Uploading a Recording Clip via a Web Browser
- View Remote Feature
- Camera Control Function
- Changing the Settings via a Web Browser
- Managing the Network Connection Settings File
- Performing Live Streaming
- Others
Selecting Specific Person from Several
Persons
1
Hold down the user button that is assigned
with
“Face Detect”.
0
The camera recorder will enter face
selection mode and the face detection icon
(q) will blink.
0
An orange frame will appear on the face of
the person nearest to the center of the
screen.
Blue frames will appear on the faces
of others.
.
Detection Frame (Blue)
Detection Frame (Orange)
Blinking
2
Select a specific person.
0
Use the cross-shaped button (HIJK) to
select a person.
0
An orange frame will appear on the face of
the selected person and focus will be
automatically adjusted.
.
Detection Frame (Blue)
Detection Frame (Orange)
3
Press the Set button (R) to confirm the
person for face detection.
Memo :
0
Press the [CANCEL] button to cancel the
selection.
0
You
can specify the detection sensitivity and the
operation speed after losing sight of the face
using [Main Menu] B [Camera Function] B
[User Switch Set] B [Face Detect] B [Sensitivity]
and [Hysteresis].
(A P101
[ Sensitivity ] )
(A P101 [ Hysteresis ] )
Adjusting the Brightness
Adjust the brightness using Iris, Gain, Shutter
speed and ND filter according to the brightness of
the object.
Adjusting the Brightness Automatically
When the [FULL AUTO] switch is set to “ON”, Iris,
Gain,
Shutter speed and ND filter are automatically
adjusted according to the brightness of the object
to maintain optimum brightness.
.
AE L
EVEL
PUSH A
UTO
FULL AUTO
ON
OFF
AE LEVEL
MENU/THUMB
GAIN
CANCEL
WHT BAL SHUTTER
AE LOCK/4
Memo :
0
You can use the cross-shaped button (HI) on
the side of the camera recorder to set the target
level (brighter/darker) to maintain optimum
brightness during automatic adjustment.
(A P98 [ AE Level ] )
0
The convergence speed of the automatic
adjustment for gain, shutter and iris can be set
in the menu.
(A P98 [ AE Speed ] )
0
If one or more of the items (Gain, Iris and
Shutter) have been set to “Auto”, the value of the
corresponding items when the user button that
is assigned “AE Lock” is pressed can be fixed.
(A P
101 [ AE Lock ] )
Adjusting the Brightness Manually
When the [FULL AUTO] switch is set to “OFF”,
some or all of the items (Iris, Gain and Shutter
Speed) can be manually adjusted.
(A P
54 [Adjusting the Iris] )
(A P55 [Setting the Gain] )
(A P56 [Setting the Electronic Shutter] )
Memo :
0
If Iris, Gain and Shutter Speed are manually
adjusted, the [AE Level
] setting is temporarily
disabled.
53
Shooting