Basic Operating Instructions

T
Focus Assist
0
“FOCUS
” is displayed when auto focus is
activated.
0
When ACCU-Focus is enabled, “ACCU-
FOCUS
” blinks for about 10 seconds while
Focus Assist starts up, after which the
“FOCUS” indicator lights up.
0
If recording starts while [ACCU-Focus
] is
active, [ACCU-Focus] will be forcibly
deactivated.
Memo :
0
Displayed in the Display 0 screen only when
there is a change.
U
Luminance Information
Displayed when the Spot Meter function is
activated.
MAX : Maximum luminance
MIN : Minimum luminance
V
Date/Time Display
Displays the current date and time.
Memo :
0
The date/time display style can be specified in
[Main
Menu] B [LCD/VF] B [Display Settings] B
[Date Style]/[Time Style].
0
This item is not displayed when
[Main Menu] B
[LCD/VF] B [Display Settings] B [Date/Time] is
set to “Off”.
0
When [Main Menu] B [System] B [Record Set]
B [Time Stamp
] is set to “On”, this item is not
displayed.
W
Zoom Display
0
Displays the zoom position. (Zoom bar or
value)
0
The zoom bar will only be displayed for 3
seconds after the zoom operation is
activated.
0
The
value will always be displayed. (0 to 99)
Memo :
0
You can specify the display method (Number/
Bar)
in [LCD/VF] B [Display Settings] B “Zoom”.
This item will not be displayed when “Off” is
selected.
0
Displayed in the Display 0 screen only when
there is a change.
X
Network Connection Icon a
When [Main Menu] B [System] B [Network] is
set to “On(SDI Off)” or “On(HDMI Off)
”, the
network connection status is displayed.
This icon is not displayed when “Off” is selected.
Icon Status
.
(Blink)
Connection is not established
(starting up, preparing for
connection)
.
(Yellow)
Connection is not established
(preparing for connection)
.
Connection is established
.
When a USB adapter different
from the connection settings is
detected
(No display) When an incompatible USB
adapter is detected, or when
[Network] is set to “Off”
Memo :
0
When a cellular adapter that supports LTE
connection
display is in use, “LTE” will appear to
the left of the above icon when LTE connection
is detected.
Y
Time Code (I)/User’s Bit (J) Display
0
Displays the time code (hour: minute:
second:
frame) or user’s bit data recorded in
the SD card being played back.
0
Example of time code display:
.
00:00:00:00
※
* Colon (:) denotes non-drop frames and dot (.)
denotes drop frames.
0
Example of user’s bit display:
.
FF EE DD 20
31
Others