Basic Operating Instructions

Symptom Action
The time code and user’s bit
are not displayed.
0
Even in Camera mode or Media mode, the time code and user’s bit
may not be displayed depending to the type of display.
0
Is [LCD/VF] B [Display Settings
] B [TC/UB] set to “Off”? To display
the time code or user’s bit, set it to “TC” or “UB”.
The date and time are not
displayed.
0
The date and time are only displayed on the Display 1 and Display 2
screens in the Camera mode (during shooting).
0
Is [System] B [Record Set] B [Time Stamp
] set to “On”? To display
the date and time, set it to “Off”.
Incorrect display on the
viewfinder.
0
Is the LCD monitor used with [LCD/VF] B [LCD + VF] set to “Off”?
The actual recording time is
shorter than the estimated
time.
0
The recordable time may be shorter depending on the shooting
conditions or the subject.
The two camera recorders are
not synchronized even though
the time codes have been
synchronized. (Z on the Slave
device is not displayed.)
0
Is the [
TC IN/OUT] switch correctly set?
0
Set [System] B [Record Set] B [Record Format
] B [WFrame & Bit
Rate] such that the two camera recorders have the same frame rate.
Cannot connect to wireless
LAN. a
0
Check the mode of connection and method of setting ([SSID] and
[Passphrase
] in cases other than WPS).
0
Even if the Passphrase is wrong,
“Completed the Setup Wizard.
Please Input the Passphrase into Your Device.” may appear at the
browser setting depending on the type of encryption.
Adjust [Passphrase] again.
The View Remote screen turns
black.
The screen flickers.
The screen freezes.
Cannot perform remote
operation.
a
0
The network path is congested.
Wait a while before refreshing (reloading) the web browser.
The clips cannot be uploaded
to the FTP server. a
0
Adjust the [Clip Server] settings.
0
The maximum size of the recorded clip is 64 GB.
If a file size limit is set in the FTP server settings, set the size limit to
more than 64 GB.
The wireless LAN is
disconnected. a
0
The wireless LAN may be disconnected depending on the
environment. Change the usage environment.
0
Connect via wired LAN.
GPS signal cannot be
received. a
0
Signal reception from GPS satellites may be affected by buildings or
trees.
Perform
positioning preferably at an unobstructed location with a clear
view.
The position is not accurate.
a
0
The
precision error may be up to hundreds of meters if the GPS signal
is weak or reflected off surrounding buildings.
The images and audio sound
during live streaming are
choppy. a
0
Depending on the type of network adapter used and the connection,
streaming may not be possible with the encoding bit rate specified.
Please reduce the encoding bit rate.
37
Others