User manual
Table Of Contents
- Introduction
- Preparations
- Shooting
- Basic Shooting Procedures
- Selecting System Definition, File Format and Video Format
- Zoom Operation
- Focus Operation
- Adjusting the Focusing by Face Detection
- Adjusting the Brightness
- Adjusting the Iris
- Setting the Gain
- Setting the Electronic Shutter
- Setting the ND Filter
- Adjusting the White Balance
- Adjusting the Camera Image
- Using the Image Stabilizer
- Audio Recording
- Monitoring Audio Sound During Recording Using a Headphone
- Time Code and User’s Bit
- Setting Time Code Generator
- Setting the User’s Bit
- Synchronizing Time Code on Another Camera
- Setting Zebra Pattern
- Setting Spot Meter
- Acquiring Positioning Information by GPS
- Viewing Recorded Videos Immediately (Clip Review)
- Splitting the Clips Freely (Clip Cutter Trig)
- Recording Simultaneously at Two Different Definitions
- Series Rec
- Dual Rec
- Backup Rec
- Special Recording
- Playback
- Menu Display and Detailed Settings
- Display/Status Screen
- Camera Features
- Connecting External Devices
- Connecting to the Network
- Functions of Network Connection
- Preparing Network Connection
- Importing Metadata
- Uploading a Recorded Video Clip
- FTP Resume Feature
- Connecting from a Web Browser
- Editing Metadata
- Uploading a Recording Clip via a Web Browser
- View Remote Feature
- Camera Control Function
- Changing the Settings via a Web Browser
- Managing the Network Connection Settings File
- Performing Live Streaming
- Others
TC/UB Menu
Menu screen for setting time code and user’s bit.
This item cannot be selected in the Media mode,
or during recording.
TC Generator
For setting the operation of the time code.
0
Free Run(Ext):
External time code input will be synchronized
with this and the time code will be recorded.
0
Free Run:
The time code operates in the run mode at all
times regardless of the recording status. It
continues to run even when the power of the
camera recorder is turned off.
0
Rec Run:
The time code operates in the run mode during
recording. It continues to run in the order of the
recorded clips as long as the SD card is not
replaced. If the SD card is removed and
recording is made on another card, time code
will be recorded on the new card from where it
was left off in the previous card.
0
Regen:
The time code operates in the run mode during
recording. When the SD card is replaced, the
last
time code recorded on the card is read and
recorded on a new card so that the time code
continues in running order.
[Setting Values: Free Run(Ext), Free Run, RRec
Run, Regen]
TC Preset
For setting the time code (hour, minute, second,
frame).
Display
: Drop setting 02:02:25.20
: Non Drop setting 02:02:25:20
UB Mode
For setting the recording mode of the user’s bit.
0
Date:
Records the date.
0
Time:
Records the time.
0
Preset:
Records according to the preset setting.
(A P69
[Setting the User’s Bit] )
[Setting Values: Date, Time, RPreset]
Memo :
0
If UB Mode is set to “Time
”, the user’s bit
operates in the 24-hour format even if the LCD
display is in the 12-hour format.
9
Preset
For setting the user’s bit. (Digit by digit)
Display
: AB CD EF 01
(A P69 [Presetting the User’s Bit] )
Memo :
0
When [UB Mode] is set to
“Date” or “Time”, this
item appears as “---” and preset is disabled.
Drop Frame
For setting the framing mode of the time code
generator.
0
Non Drop:
Internal time code generator works in the non-
drop-frame
mode. Use this setting when placing
emphasis on the number of frames.
0
Drop:
Internal time code generator works in the drop-
frame mode. Use this setting when placing
emphasis on the recording time.
[Setting Values: Non Drop, RDrop]
Memo :
0
This item can be set only when
[Main Menu] B
[System] B [Record Set] B [Record Format] B
[WFrame & Bit Rate] is set to “60p”, “30p”, or
“60i”. When the frame rate is “24p”, “Non Drop”
becomes fixed and cannot be selected. When
the frame rate is “50p”, “25p”, or “50i”, this item
appears as “---” and cannot be selected.
(A P
118 [WFrame & Bit Rate a, Frame & Bit
Rate b] )
107
Menu Display and Detailed Settings