User manual
Table Of Contents
- Introduction
- Preparations
- Shooting
- Basic Shooting Procedures
- Selecting System Definition, File Format and Video Format
- Zoom Operation
- Focus Operation
- Adjusting the Focusing by Face Detection
- Adjusting the Brightness
- Adjusting the Iris
- Setting the Gain
- Setting the Electronic Shutter
- Setting the ND Filter
- Adjusting the White Balance
- Adjusting the Camera Image
- Using the Image Stabilizer
- Audio Recording
- Monitoring Audio Sound During Recording Using a Headphone
- Time Code and User’s Bit
- Setting Time Code Generator
- Setting the User’s Bit
- Synchronizing Time Code on Another Camera
- Setting Zebra Pattern
- Setting Spot Meter
- Acquiring Positioning Information by GPS
- Viewing Recorded Videos Immediately (Clip Review)
- Splitting the Clips Freely (Clip Cutter Trig)
- Recording Simultaneously at Two Different Definitions
- Series Rec
- Dual Rec
- Backup Rec
- Special Recording
- Playback
- Menu Display and Detailed Settings
- Display/Status Screen
- Camera Features
- Connecting External Devices
- Connecting to the Network
- Functions of Network Connection
- Preparing Network Connection
- Importing Metadata
- Uploading a Recorded Video Clip
- FTP Resume Feature
- Connecting from a Web Browser
- Editing Metadata
- Uploading a Recording Clip via a Web Browser
- View Remote Feature
- Camera Control Function
- Changing the Settings via a Web Browser
- Managing the Network Connection Settings File
- Performing Live Streaming
- Others
LCD/VF Menu
Item for specifying settings related to the LCD
monitor or viewfinder screen.
This menu screen can be used to specify settings
related to the Focus Assist mode, zebra pattern
display, screen size, marker, and safety zone. In
addition, it is also used for selecting whether to
display characters on the LCD monitor or
viewfinder screen, as well as for adjusting the
picture quality of the LCD monitor.
Shooting Assist...
Menu for setting the Shooting Assist function.
(A P108
[Shooting Assist Item] )
Marker Settings...
For setting items such as the safety zone and
center mark.
(A P109
[Marker Settings Item] )
Display Settings...
For specifying display-related settings.
(A P110
[Display Settings Item] )
LCD + VF
For selecting a method to switch between the LCD
monitor and viewfinder screen displays.
(A P36 [Adjusting the LCD Monitor and
Viewfinder] )
0
On:
Displays images on the viewfinder at all times.
0
Off:
Turns
off the viewfinder screen display when the
LCD monitor is turned on.
[Setting Values: On, ROff]
Memo :
0
When [
Network] is set to “On”, this item is fixed
at “Off” and cannot be selected.
VF Color
For selecting whether to display the image on the
viewfinder screen in color or black-and-white.
Select “On” to display in color, and
“Off” to display
in black-and-white.
[Setting Values: ROn, Off]
Memo :
0
The setting of this item is valid only in Camera
mode.
0
When this item is set to
“Off”, only the captured
images are displayed in black-and-white. The
display and menu screens are displayed in
color.
VF Bright
For
setting the brightness of the viewfinder screen.
Increasing the value increases the brightness.
[Setting Values: -10 to +10 (R 0)]
VF Contrast
For
setting the difference in luminance between the
darkest and brightness areas in the viewfinder
screen.
Increasing the value increases the contrast.
[Setting Values: -10 to +10 (R 0)]
LCD Contrast
For
setting the difference in luminance between the
darkest and brightness areas in the LCD monitor.
Increasing the value increases the contrast.
[Setting Values: -10 to +10 (R 0)]
LCD Backlight
For setting the brightness of the LCD monitor
backlight.
Increasing the value increases the brightness.
[Setting Values: -1, R 0, +1]
LCD Mirror
For specifying the image display method when
facing the LCD monitor.
Select “Mirror
” to display the image after laterally
inverting it. (Mirror display)
(A P36 [Adjusting the LCD Monitor and
Viewfinder] )
[Setting Values: Mirror, RNormal]
Memo :
0
The setting of this item is valid only in Camera
mode.
0
During color bar, menu screen and status
screen display, the “Mirror” setting is disabled.
(A P140 [Color Bar Output] )
Shooting Assist Item
Focus Assist
For setting whether to add color to the contour of
the focused image upon switching the image to
black-and-white.
[Setting Values: On, ROff]
108
Menu Display and Detailed Settings