User manual
Table Of Contents
- Introduction
- Preparations
- Shooting
- Basic Shooting Procedures
- Selecting System Definition, File Format and Video Format
- Zoom Operation
- Focus Operation
- Adjusting the Focusing by Face Detection
- Adjusting the Brightness
- Adjusting the Iris
- Setting the Gain
- Setting the Electronic Shutter
- Setting the ND Filter
- Adjusting the White Balance
- Adjusting the Camera Image
- Using the Image Stabilizer
- Audio Recording
- Monitoring Audio Sound During Recording Using a Headphone
- Time Code and User’s Bit
- Setting Time Code Generator
- Setting the User’s Bit
- Synchronizing Time Code on Another Camera
- Setting Zebra Pattern
- Setting Spot Meter
- Acquiring Positioning Information by GPS
- Viewing Recorded Videos Immediately (Clip Review)
- Splitting the Clips Freely (Clip Cutter Trig)
- Recording Simultaneously at Two Different Definitions
- Series Rec
- Dual Rec
- Backup Rec
- Special Recording
- Playback
- Menu Display and Detailed Settings
- Display/Status Screen
- Camera Features
- Connecting External Devices
- Connecting to the Network
- Functions of Network Connection
- Preparing Network Connection
- Importing Metadata
- Uploading a Recorded Video Clip
- FTP Resume Feature
- Connecting from a Web Browser
- Editing Metadata
- Uploading a Recording Clip via a Web Browser
- View Remote Feature
- Camera Control Function
- Changing the Settings via a Web Browser
- Managing the Network Connection Settings File
- Performing Live Streaming
- Others
o
Adaptive Bit Rate
If “On
” is selected, the bit rate setting value of
live streaming is set to maximum limit, and the
bit rate is changed automatically according to
changes in the network bandwidth.
[Setting Values: On, ROff]
Memo :
0
[Adaptive Bit Rate
] is selectable when [Type] is
set to “ZIXI” and [Latency] is set to a value other
than “Minimun(ZIXI Off)”.
*The
bit rate is displayed on the status screen only
when “On” is set.
o
PCR Jitter
Setting to “Low” reduces to PCR jitter of live
streaming.
[Setting Values: Low, RNormal]
Memo :
0
This
item is selectable only when [Type] is set to
“MPEG2-TS/UDP”.
o
SMPTE 2022-1 FEC
Set to “On” to use FEC (Forward Error
Correction).
A
transmission system that recovers the missing
packets in the decoding process without having
to retransmit the missing packets.
[Setting Values: On, ROff]
* The decoder must be compatible with SMPTE
2022-1.
o
FEC Matrix
For setting the amount of FEC (Forward Error
Correction) overhead for configuring
SMPTE2022-1.
(A P177
[Setting the FEC Matrix] )
Memo :
0
This item is selectable only when
[SMPTE
2022-1 FEC] is set to “On”.
9
Resolution
For
setting the resolution of the video image during
live distribution.
The camera recorder restarts when the setting is
changed. “Please Wait...” will be displayed.
The available options vary according to the settings
for [WResolution] and [WFrame & Bit Rate] under
[Record Format].
W Resolution
No. of
Frames for
WFrame &
Bit Rate
Setting values
(R: default value)
1920x1080,
1440x1080
60i, 30p R1920x1080 (*1),
1280x720,
720x480,
640x360
50i, 25p R1920x1080 (*2),
1280x720,
720x576,
640x360
1280x720 60p, 30p 1280x720,
720x480,
640x360
50p, 25p 1280x720,
720x576,
640x360
720x480
(U model)
60i 720x480,
640x360
720x576
(E model)
50i 720x576,
640x360
*1 Default value for U model
*2 Default value for E model
Memo :
0
The settings cannot be changed during live
streaming or recording.
0
The Aspect Ratio for the live streaming image is
fixed to “16:9”.
9
Frame & Bit Rate
For setting the frame rate and encoding bit rate of
the video image during live distribution.
The
available options vary according to the settings
for [Resolution] above, as well as [WFrame & Bit
Rate] under [Record Format].
124
Menu Display and Detailed Settings