User manual
Table Of Contents
- Introduction
- Preparations
- Shooting
- Basic Shooting Procedures
- Selecting System Definition, File Format and Video Format
- Zoom Operation
- Focus Operation
- Adjusting the Focusing by Face Detection
- Adjusting the Brightness
- Adjusting the Iris
- Setting the Gain
- Setting the Electronic Shutter
- Setting the ND Filter
- Adjusting the White Balance
- Adjusting the Camera Image
- Using the Image Stabilizer
- Audio Recording
- Monitoring Audio Sound During Recording Using a Headphone
- Time Code and User’s Bit
- Setting Time Code Generator
- Setting the User’s Bit
- Synchronizing Time Code on Another Camera
- Setting Zebra Pattern
- Setting Spot Meter
- Acquiring Positioning Information by GPS
- Viewing Recorded Videos Immediately (Clip Review)
- Splitting the Clips Freely (Clip Cutter Trig)
- Recording Simultaneously at Two Different Definitions
- Series Rec
- Dual Rec
- Backup Rec
- Special Recording
- Playback
- Menu Display and Detailed Settings
- Display/Status Screen
- Camera Features
- Connecting External Devices
- Connecting to the Network
- Functions of Network Connection
- Preparing Network Connection
- Importing Metadata
- Uploading a Recorded Video Clip
- FTP Resume Feature
- Connecting from a Web Browser
- Editing Metadata
- Uploading a Recording Clip via a Web Browser
- View Remote Feature
- Camera Control Function
- Changing the Settings via a Web Browser
- Managing the Network Connection Settings File
- Performing Live Streaming
- Others
Auto Focus/Optical Image Stabilizer
The camera recorder is equipped with a face
detection
auto focus function that covers the entire
screen.
It can switch to manual focus as well.
A built-in optical image stabilizer feature is also
available.
Professional Switch Layout and Various
Video Parameter Settings
Switches for Gain and White Balance are available
on the side panel to enable quick switching
according to the shooting scene.
Image parameters such as gamma and color
matrixes are also available in the menu for
adjusting preferred tones.
4-position ND Filter
This camera recorder incorporates three types of
ND filters.
Adjust the amount of light according to the
brightness during shooting by switching the 4-
position ND filter (OFF, 1/4, 1/16, 1/64).
0.45-inch 1.22M Pixel Color Viewfinder,
3.5-inch 920K Pixel LCD Display
(Equipped with Focus Assist Function)
Built-in Stereo Microphone, 2-channel
XLR Audio Input (Microphone/Line
Switch, Phantom Power Supply) and
Mini Jack Input Terminal for Wireless
Microphone Receiver
This camera recorder is equipped with high-
performance analog circuits. With the wide
dynamic range, soft sounds and loud sounds can
be recorded without distortion compared to
previous models.
Pre Rec Function (Up to 15 Seconds)
and Interval Rec Function
Supports Wired Remote Control
35 Mbps High-quality Recording Mode
This camera recorder is equipped with a 35 Mbps
mode for the MPEG-2 (MOV, MP4, MXF) and H.
264
(MOV) file formats to support recording in high
image quality.
50 Mbps High-quality Recording Mode
This camera recorder comes with a 50 Mbps mode
in the H.264 format (1920x1080: MOV) to support
high-resolution video recording.
Built-in GPS a
This camera recorder is equipped with a GPS
function. Position information obtained from the
GPS
satellite can be recorded as metadata during
shooting.
Diverse Network Functions a
This camera recorder supports various operations
from
a network connected device, such as remote
control, viewing, editing of metadata, file transfer to
FTP server, and live streaming.
Also, with the “Zixi” cloud service supported, which
enables highly-reliable and stable data
transmission, “SMPTE ST2022-1/2” and “RTMP”
live streaming are possible.
Application Software Provided
The [JVC ProHD Clip Manager] application
software
is provided for you to copy recorded clips
to Windows or Macintosh computers and for
checking the video images. (For MP4 file format)
The disc provided with this camera recorder
comes with [JVC ProHD Clip Manager] and other
application software as well as their user guides.
* For details, refer to the user guides for each
application software.
14
Introduction