User manual
Table Of Contents
- Introduction
- Preparations
- Shooting
- Basic Shooting Procedures
- Selecting System Definition, File Format and Video Format
- Zoom Operation
- Focus Operation
- Adjusting the Focusing by Face Detection
- Adjusting the Brightness
- Adjusting the Iris
- Setting the Gain
- Setting the Electronic Shutter
- Setting the ND Filter
- Adjusting the White Balance
- Adjusting the Camera Image
- Using the Image Stabilizer
- Audio Recording
- Monitoring Audio Sound During Recording Using a Headphone
- Time Code and User’s Bit
- Setting Time Code Generator
- Setting the User’s Bit
- Synchronizing Time Code on Another Camera
- Setting Zebra Pattern
- Setting Spot Meter
- Acquiring Positioning Information by GPS
- Viewing Recorded Videos Immediately (Clip Review)
- Splitting the Clips Freely (Clip Cutter Trig)
- Recording Simultaneously at Two Different Definitions
- Series Rec
- Dual Rec
- Backup Rec
- Special Recording
- Playback
- Menu Display and Detailed Settings
- Display/Status Screen
- Camera Features
- Connecting External Devices
- Connecting to the Network
- Functions of Network Connection
- Preparing Network Connection
- Importing Metadata
- Uploading a Recorded Video Clip
- FTP Resume Feature
- Connecting from a Web Browser
- Editing Metadata
- Uploading a Recording Clip via a Web Browser
- View Remote Feature
- Camera Control Function
- Changing the Settings via a Web Browser
- Managing the Network Connection Settings File
- Performing Live Streaming
- Others
Marker and Safety Zone
Displays (Camera Mode
Only)
The marker and safety zone displays are useful in
helping you determine the angle of view for the
image according to the shooting purpose.
The
marker is displayed only in the Camera mode.
Displaying the Grid Marker
1
Set [LCD/VF] B [Marker Settings
] B [Grid
Marker] to “On”.
(A P
109 [ Grid Marker ] )
A grid that divides the screen into 3x3 is
displayed.
.
Memo :
0
When [Grid Marker] is set to
“On”, [Aspect
Ratio], [Aspect Marker], and [Safety Zone] do
not function.
0
Example of display when [Aspect Ratio] = “4:3”,
[Aspect Marker] = “Line+Halftone”, and [Center
Mark] = “On”
.
Aspect Marker
Center MarkSafety Zone
Memo :
0
You can turn On/Off the safety zone and center
mark displays using
[LCD/VF] B [Marker
Settings] B [Aspect Ratio], [Safety Zone], and
[Center Mark].
(A P
110 [ Safety Zone ] )
Smoothening the Skin
Color (Skin Detail
Function)
The
Skin Detail function can be used to reduce the
contour enhancement of video signals for only the
skin areas so as to produce a smoother skin tone.
1
Set [Skin Detail] to “On”.
(A P
106 [ Skin Detail ] )
Set [Main Menu] B [Camera Process] B
[Detail]/[Adjust] B [Skin Detail] to “On”.
Memo :
0
You can specify the adjustment level for the
contour enhancement of the skin tone in
[Main
Menu] B [Camera Process] B [Detail]/[Adjust]
B [Skin Detail]/[Level].
(A P
106 [ Level ] )
Color Bar Output
Color bars can be output on this camera recorder.
Memo :
0
The audio test signals (1 kHz) can be output
simultaneously with the color bar output.
(A P114 [ Test Tone ] )
To Output the Color Bar Using the Menu
To output color bars, follow the setting procedure
below.
1
Set [Camera Function] B [Bars
] to “On”.
(A P
98 [ Bars ] )
Color bars are output.
To Output the Color Bar Using the User Button
1
Assign the “Bars” function to any of the
user buttons.
(A P38
[Assignment of Functions to User
Buttons] )
2
Press the user button that is assigned with
“
Bars”.
Color bars are output.
140
Camera Features