User manual
Table Of Contents
- Introduction
- Preparations
- Shooting
- Basic Shooting Procedures
- Selecting System Definition, File Format and Video Format
- Zoom Operation
- Focus Operation
- Adjusting the Focusing by Face Detection
- Adjusting the Brightness
- Adjusting the Iris
- Setting the Gain
- Setting the Electronic Shutter
- Setting the ND Filter
- Adjusting the White Balance
- Adjusting the Camera Image
- Using the Image Stabilizer
- Audio Recording
- Monitoring Audio Sound During Recording Using a Headphone
- Time Code and User’s Bit
- Setting Time Code Generator
- Setting the User’s Bit
- Synchronizing Time Code on Another Camera
- Setting Zebra Pattern
- Setting Spot Meter
- Acquiring Positioning Information by GPS
- Viewing Recorded Videos Immediately (Clip Review)
- Splitting the Clips Freely (Clip Cutter Trig)
- Recording Simultaneously at Two Different Definitions
- Series Rec
- Dual Rec
- Backup Rec
- Special Recording
- Playback
- Menu Display and Detailed Settings
- Display/Status Screen
- Camera Features
- Connecting External Devices
- Connecting to the Network
- Functions of Network Connection
- Preparing Network Connection
- Importing Metadata
- Uploading a Recorded Video Clip
- FTP Resume Feature
- Connecting from a Web Browser
- Editing Metadata
- Uploading a Recording Clip via a Web Browser
- View Remote Feature
- Camera Control Function
- Changing the Settings via a Web Browser
- Managing the Network Connection Settings File
- Performing Live Streaming
- Others
Setting the Record Format Menu
1
Display the [Main Menu] B [
Record
Format] menu.
2
Set each of the items.
3
After setting is complete for all items, press
the [
FOCUS ASSIST/1] button.
0
The recording format is switched.
0
A “Please Wait...
” message appears on the
screen during switching.
Zoom Operation
Adjusts the angle of view.
Zoom ratio: 1x to 23x (optical zoom only)
Zooming can be operated using any of the three
levers/rings below.
0
Zoom Lever at the Grip
0
Zoom Lever at the Handle
0
Zoom Ring at the Lens Section:
Functions as a zoom ring when the
[ZOOM
SERVO/MANUAL] switch is set to “MANUAL”.
.
W
T
REC
HOLD
REC
FIX VAR OFF
SERV O MANUAL
ZOOM
Using the Zoom Lever at the Grip
1
Set the [ZOOM SERVO/MANUAL] switch to
“
SERVO”.
2
Press the zoom lever to zoom.
0
The zoom speed changes according to the
extent the zoom lever is being pushed.
0
Zooms into wide angle and increases the
angle of view when
“W” is pressed.
0
Zooms into telephoto and decreases the
angle of view when
“T” is pressed.
0
A zoom bar appears during zoom operation
.
12 .5/ 30 f
ps
ps
P 13000K
P 13000K
1/100
1/100
F1.6
F1.6
0dB
0dB
AE+6
AE+6
ND 1/64
ND 1/64
12:34:56
12:34:56
Jan 12,2016
Jan 12,2016
00:00:00.00
00:00:00.00
40
40
30
30
20
20
10
10
0
5.
5.6 f t
12 .5/ 30 f
ps
ps
P 13000K
P 13000K
1/100
1/100
F1.6
F1.6
0dB
0dB
AE+6
AE+6
ND 1/64
ND 1/64
12:34:56
12:34:56
Jan 12,2016
Jan 12,2016
00:00:00.00
00:00:00.00
40
40
30
30
20
20
10
10
0
5.
5.6 f t
Using the Zoom Lever at the Handle
1
Set the [ZOOM SERVO/MANUAL] switch to
“SERVO”.
2
Set the [FIX/VAR/OFF] zoom speed switch
to “FIX”
or “VAR”.
Memo :
0
Setting to “FIX” will allow the zoom operation to
move
at the speed set in [Handle Zoom Speed].
0
Set the zoom speed using
[Main Menu] B
[Camera Function] B [Handle Zoom Speed].
(A
P99 [ Handle Zoom Speed ] )
0
Setting to “VAR” will change the zoom speed
according to the pressure applied on the lever.
3
Press the zoom lever at the handle to zoom.
Memo :
0
When
the [FIX/VAR/OFF] zoom speed switch is
set to “OFF”, the zoom lever at the handle
section cannot be used.
48
Shooting