User manual
Table Of Contents
- Introduction
- Preparations
- Shooting
- Basic Shooting Procedures
- Selecting System Definition, File Format and Video Format
- Zoom Operation
- Focus Operation
- Adjusting the Focusing by Face Detection
- Adjusting the Brightness
- Adjusting the Iris
- Setting the Gain
- Setting the Electronic Shutter
- Setting the ND Filter
- Adjusting the White Balance
- Adjusting the Camera Image
- Using the Image Stabilizer
- Audio Recording
- Monitoring Audio Sound During Recording Using a Headphone
- Time Code and User’s Bit
- Setting Time Code Generator
- Setting the User’s Bit
- Synchronizing Time Code on Another Camera
- Setting Zebra Pattern
- Setting Spot Meter
- Acquiring Positioning Information by GPS
- Viewing Recorded Videos Immediately (Clip Review)
- Splitting the Clips Freely (Clip Cutter Trig)
- Recording Simultaneously at Two Different Definitions
- Series Rec
- Dual Rec
- Backup Rec
- Special Recording
- Playback
- Menu Display and Detailed Settings
- Display/Status Screen
- Camera Features
- Connecting External Devices
- Connecting to the Network
- Functions of Network Connection
- Preparing Network Connection
- Importing Metadata
- Uploading a Recorded Video Clip
- FTP Resume Feature
- Connecting from a Web Browser
- Editing Metadata
- Uploading a Recording Clip via a Web Browser
- View Remote Feature
- Camera Control Function
- Changing the Settings via a Web Browser
- Managing the Network Connection Settings File
- Performing Live Streaming
- Others
Using Zoom Ring at the Lens Section
1
Set the [ZOOM SERVO/MANUAL] switch to
“
MANUAL”.
You can adjust the preferred angle of view by
turning the zoom ring.
Saving/Recalling Current Zoom
Position (Preset Zoom)
This allows you to register up to three zoom
positions.
1
Assign the “Preset Zoom1”, “Preset
Zoom2
”, or “Preset Zoom3” function to any
of the user buttons.
(A P
38 [Assignment of Functions to User
Buttons] )
(A P100 [USER1 to USER7, LCD KEY▲, LCD
KEY▶, LCD KEY▼, LCD KEY◀] )
2
Save the current zoom position.
0
Press any of the buttons assigned with the
“Preset Zoom1
”, “Preset Zoom2”, or “Preset
Zoom3” function for more than 1 second.
0
The current zoom position will be stored.
3
Recall the stored zoom position.
0
Press any of the buttons assigned with the
“Preset Zoom1
”, “Preset Zoom2”, or “Preset
Zoom3” function and release within 1
second.
0
The camera recorder zooms to the stored
zoom position.
Memo :
0
To recall the stored zoom position, set the
[ZOOM SERVO/MANUAL
] switch to “SERVO”.
0
Set the speed for shifting to the preset zoom
position and the rate of change for starting and
stopping the preset zoom operation in
[Main
Menu] B [Camera Function] B [Preset Zoom1]
to [Preset Zoom3].
(A P101
[Preset Zoom1, Preset Zoom2, Preset
Zoom3] )
0
Operating other zoom maneuvers during a
zoom position recall will cancel the recall.
Focus Operation
Adjusting Focus Manually
.
FOCUS
MANU
PUSH AUTO
FOCUS ASSIST/1
TIME CODE
AUTO
1
Set the [FOCUS AUTO/MANU/∞] switch to
“MANU
”.
The manual focus icon d appears on the
screen.
.
P13000K
1/100
F1. 6
0
dB
AE+6
ND 1 /64
12 :34 :56
Jan 12, 2016
00:00:00.00
4030 20 10 0
5 . 6 f t
Memo :
0
If [Main Menu]
B
[LCD/VF]
B
[Display Settings]
B
[Focus] is set to “Off”, the
d
icon will not appear.
(A P110 [ Focus ] )
2
Turn the focus ring to adjust the focus.
Memo :
0
Using the Focus Assist or Expanded Focus
function makes it easier to focus.
(A P51
[Focus Assist Function] )
(A P51 [Expanded Focus Function] )
0
Pressing the [FOCUS AUTO] button in the
Manual Focus mode activates the One-push
Auto Focus mode, while holding down the
[FOCUS AUTO] button activates the Push Auto
Focus mode.
(A P
50 [One Push Auto Focus] )
(A P50 [Setting to Auto Focus Temporarily
(Push Auto Focus)] )
49
Shooting