User manual
Table Of Contents
- Introduction
- Preparations
- Shooting
- Basic Shooting Procedures
- Selecting System Definition, File Format and Video Format
- Zoom Operation
- Focus Operation
- Adjusting the Focusing by Face Detection
- Adjusting the Brightness
- Adjusting the Iris
- Setting the Gain
- Setting the Electronic Shutter
- Setting the ND Filter
- Adjusting the White Balance
- Adjusting the Camera Image
- Using the Image Stabilizer
- Audio Recording
- Monitoring Audio Sound During Recording Using a Headphone
- Time Code and User’s Bit
- Setting Time Code Generator
- Setting the User’s Bit
- Synchronizing Time Code on Another Camera
- Setting Zebra Pattern
- Setting Spot Meter
- Acquiring Positioning Information by GPS
- Viewing Recorded Videos Immediately (Clip Review)
- Splitting the Clips Freely (Clip Cutter Trig)
- Recording Simultaneously at Two Different Definitions
- Series Rec
- Dual Rec
- Backup Rec
- Special Recording
- Playback
- Menu Display and Detailed Settings
- Display/Status Screen
- Camera Features
- Connecting External Devices
- Connecting to the Network
- Functions of Network Connection
- Preparing Network Connection
- Importing Metadata
- Uploading a Recorded Video Clip
- FTP Resume Feature
- Connecting from a Web Browser
- Editing Metadata
- Uploading a Recording Clip via a Web Browser
- View Remote Feature
- Camera Control Function
- Changing the Settings via a Web Browser
- Managing the Network Connection Settings File
- Performing Live Streaming
- Others
Automatic Shutter Mode (Automatic
Shutter Adjustment)
1
Press the [SHUTTER] button or set the
[
FULL AUTO] switch to “ON” to enter
Automatic Shutter mode.
0
The a icon appears on the screen.
0
The camera recorder enters the Automatic
Shutter mode. The shutter speed is
automatically adjusted according to the
brightness of the object.
Memo :
0
Switching of shutter speed with the cross-
shaped button (JK) and switching of shutter
mode with the Set button (R) are disabled.
0
You can set the controllable range for the
Automatic Shutter in [Main Menu] B [Camera
Function
] B [EEI Limit].
(A P
99 [ EEI Limit ] )
Setting the ND Filter
Use the ND filter to keep the lens aperture in the
appropriate range.
Switch according to the brightness of the object.
When the position on the switch is changed, the
selected
position of the ND filter is displayed on the
LCD monitor and viewfinder screen.
(Display 2 screen)
Memo :
0
When [
Main Menu] B [LCD/VF] B [Display
Settings] B [ND Filter] is set to “Off”, the position
of the ND filter will not be displayed.
(A P
110 [ ND Filter ] )
.
ND FILTER
1/64
1/16
1/4
OFF
.
P13000K
1/100
F1. 6
0
dB
AE+6
ND 1 /64
12 :34 :56
Jan 12, 2016
00:00:00.00
4030 20 10 0
5 . 6 f t
ND 1 / 64
Memo :
0
It
is recommended to use the ND filter to set the
lens aperture to less than F8.
ND Filter Warning Display
In order to adjust the amount of light when you are
shooting
at a relatively bright location, the diameter
of the iris may become extremely small, causing
blurry effects to occur as a result.
This phenomenon is known as “small aperture
diffraction”. You can make appropriate use of ND
filters to prevent it from occurring.
This unit displays an ND filter warning when
necessary to prompt you to select an appropriate
ND filter.
1
Set [Main Menu] B [LCD/VF] B [Display
Settings
] B [ND Filter] to “On+Assist”.
(A
P110 [ ND Filter ] )
2
When the iris diameter becomes too small
while adjusting the light intensity, or when
an ND filter is used in a dimly-lit location,
the ND filter display starts blinking.
58
Shooting